Black & Decker Li4000 Manuel d'instructions télécharger pdf (Page 11)

roubleshooting

Problem Possible Cause Possible Solution

• Battery will not charge. • Charger not plugged into • Plug charger into a

a working outlet. working outlet. Refer to

“Important Charging

Notes” for more details.

• Check current at

receptacle by plugging in

a lamp or other appliance.

• Check to see if

receptacle is connected to

a light switch which turns

power off when you turn

out the lights.

• Surrounding air temperature • Move charger and tool

too hot or too cold. to a surrounding air

temperature of above 40

degree F (4,5°C) or below

105 degree F (+40,5°C).

• Tool will not drill. • Torque adjustment collar in • Move collar position to

wrong position. largest screw icon.

• Screws stripping. • Torque adjustment collar • Move collar position to

setting too high. a smaller screw icon.

• Screws not fully seated. • Torque adjustment collar • Move collar position to

setting too low. a larger screw icon.

• Screw holder not holding • Screw is non-ferrous. • Use ferrous screw.

screw.

For assistance with your product, visit our website www.blackanddecker.com for the

location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

ACCESSORIES

Recommended accessories for use with your tool are available from your local dealer or

authorized service center. If you need assistance regarding accessories, please call:

1-800-544-6986.

WARNING: The use of any accessory not recommended for use with this tool could be

hazardous.

THE RBRC™ SEAL

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the

lithium-ion battery (or battery pack) indicates that the costs to recycle the

battery (or battery pack) at the end of its useful life have already been paid

by Black & Decker. In some areas, it is illegal to place spent lithium-ion

batteries in the trash or municipal solid waste stream and the RBRC

program provides an environmentally conscious alternative.

RBRC in cooperation with Black & Decker and other battery users, has established

programs in the United States and Canada to facilitate the collection of spent lithium-ion

batteries. Help protect our environment and conserve natural resources by returning the

tool to an authorized Black & Decker service center for recycling. You may also contact

your local recycling center for information on where to drop off the spent battery, or call

1-800-8-BATTERY.

Service Information

All Black & Decker Service Centers are staffed with trained personnel to provide

customers with efficient and reliable power tool service. Whether you need technical

advice, repair, or genuine factory replacement parts, contact the Black & Decker location

nearest you. To find your local service location, refer to the yellow page directory under

"Tools—Electric" or call: 1-800-544-6986 or visit www.blackanddecker.com

90531282 Li4000.qxd 4/15/08 11:07 AM Page 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Black & Decker Li4000 Manuel d'instructions Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker Li4000