Black & Decker FP6010 Manuel d'utilisation et d'entretien télécharger pdf (Page 13)

Note: The blade attachments are very sharp. Use caution when handling and

storing.

4. Place food in workbowl.

5. Place lid on workbowl and lock into place by rotating lid

counterclockwise.

6. Make sure food pushers are securely in place in feed chute. Never use

your ﬁngers to direct food through chute.

7. Press speed button to process.

8. To add food or liquid while processor is running, remove food pusher

and insert through the feed chute. Replace food pusher in chute.

9. When ﬁnished, press the PULSE|OFF button and allow blades to stop revolving

before removing lid. Twist lid clockwise to remove from the workbowl.

Important: Be sure S blade has completely stopped spinning and unplug

appliance before removing lid from processor.

10. To unlock workbowl, turn it clockwise and lift off base.

11. Carefully remove S blade by pulling shaft straight

up and empty workbowl.

Note: To remove S Blade from blade shaft, turn

counterclockwise and pull blade shaft out

from bottom. (P)

12. Unplug appliance when not in use.

USING THE MINI S BLADE IN

THE SMALL WORKBOWL

1. Lock large workbowl into position on food

processor base.

2. Place small workbowl in large workbowl, ﬁtting

the tabs on the outside of the small bowl into the

notches on the large workbowl. This will hold the

small bowl ﬁrmly in place. (Q)

3. Carefully place the mini S blade on blade shaft in bottom of workbowl.

4. Place lid on workbowl and lock into place by rotating lid

counterclockwise.

5. Follow remaining steps as outlined in USING THE S BLADE IN THE

LARGE WORKBOWL.

Important: Disks and blades must be removed before removing small

workbowl.

6. To remove small workbowl from large workbowl, use the two ﬁnger

grips to lift up.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Pas de commentaire

Black & Decker FP6010 Manuel d'utilisation et d'entretien Page 13