Black & Decker FP6010 Manuel d'utilisation et d'entretien télécharger pdf (Page 7)

4. Attach your selected blade or disk to the center post

in the bottom of the large workbowl (instructions for

individual disks/blades follow in this manual).

5. Place the workbowl lid on top of the workbowl,

aligning the tabs and locking it into place by turning

counterclockwise. The workbowl lid is locked when

it clicks ﬁrmly into place. The lid will always and

only lock when the feed chute is aligned with the

workbowl handle. (B)

Note: Be sure to lock the workbowl in place before

attaching the blades or disks and lid.

6. Insert the large food pusher into the feed chute of

the lid. Push down until the pusher clicks into place

and rests at the bottom of the feed chute. (C)

7. Plug in the appliance. If the appliance is properly

assembled, the PULSE|OFF button will illuminate. If

it does not, the interlocks are not properly engaged.

Important: For your protection this appliance has an interlock system. The

processor will not operate unless the lid and large pusher are properly locked in

place. The unit will illuminate the PULSE|OFF light when the base, lid and large

pusher are in the proper position.

USING THE FEED CHUTE AND PUSHERS

Note: Before operating the food processor, be sure

the workbowl, blades and workbowl lid are properly

assembled on the food processor base.

1. Insert the large food pusher into the wide mouth

feed chute. Insert the medium pusher inside the

large pusher and the small food pusher inside the

medium pusher. The food pushers are used to guide

ingredients through the feed chute. The small and

medium food pushers can be removed to add liquid

or additional foods. (D)

Note: The large pusher must remain in the feed chute in order for the processor

to operate. The unit will continue to operate if the medium or small pushers are

removed from the large pusher.

2. Place food to be processed in the opening of the large pusher. Use the

medium pusher to guide food through the large pusher and feed chute.

3. Use the small food pusher to guide food through the medium pusher.

4. Use the small food pusher as a measuring cup.

USING THE SPEED CONTROLS

Note: If the food processor does not run, make sure the workbowl and lid are

properly locked on the base and the large food pusher is fully in place. There is an

automatic safety lock that causes the food processor to stop working if the large

1 2 3 4 5 6 7 8 9 10 11 12 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Black & Decker FP6010 Manuel d'utilisation et d'entretien Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Transformateurs de denrées alimentaires Black & Decker FP6010