Black & Decker FP6010 Manuel d'utilisation et d'entretien télécharger pdf (Page 15)

• Knead dough no longer than one minute.

• Do not leave processor unattended during operation.

GENERAL TIPS FOR USING THE PROCESSOR

• Organize processing tasks to avoid multiple cleanups of the bowl; process

dry before wet.

• The processor will be more efﬁcient if ﬁlled no more than

full.

• If shredded, sliced or diced food piles up on one side of the bowl, stop the

processor and redistribute the food using a spatula.

• To take advantage of the speed of the processor, drop foods through the

feed chute with the processor running.

• To minimize slender foods, such as carrots or celery, from falling over in the

feed chute, cut food into several pieces and pack the feed chute with the food.

• Apply light pressure on the pusher for soft foods (berries and tomatoes)

and slightly more pressure for hard foods (onions and potatoes).

• Do not process foods that are so frozen or hard that the tip of a knife cannot

be inserted into the food.

• If a piece of hard food, such as a carrot, becomes wedged or stuck on

the blade, stop the processor and unplug, then remove the blade. Gently

remove food from the blade.

• When chopping sticky dried fruits, place the fruits in the freezer for about

10 minutes and add a little ﬂour or sugar to keep the pieces from sticking

together.

• When preparing cake or cookie batter, use the S blade to cream fat and

sugar ﬁrst and add dry ingredients last. Place nuts and fruit on top of ﬂour

mixture to prevent over chopping. Process nuts and fruits using short

pulses to blend with other ingredients.

• When using the slicing, shredding or dicing disk, do not let the food

accumulate too high (over 2/3 full); stop and empty the workbowl.

• Do not use the processor to:

- Grind coffee beans, bones, grains or hard spices

- Liquefy fruits and vegetables

- Slice or chop warm meat

CARE AND CLEANING

This product contains no user serviceable parts. Refer service to qualiﬁed

service professional.

Important: Always unplug your processor from the outlet before cleaning.

CLEANING

Important: blades are sharp. Handle blades and disks carefully.

• Completely disassemble processor parts before

washing.

• Rinse parts immediately after processing for easier

cleaning.

• Wipe base and feet with a damp cloth and dry

thoroughly. Stubborn spots can be removed by

rubbing with a damp cloth and a mild, nonabrasive

cleaner. Do not immerse base in liquid.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Black & Decker FP6010 Manuel d'utilisation et d'entretien Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Transformateurs de denrées alimentaires Black & Decker FP6010