Black & Decker KS900EL Manuel de service télécharger pdf (Page 7)

7

ENGLISH

• Keep hands away from cutting area. Never

reach underneath the work piece any

reason. Do not insert ﬁngers or thumb into

the vicinity of the reciprocating blade and

blade clamp. Do not stabilize the saw by

gripping the shoe.

• Keep blades sharp. Dull or damaged blades

may cause the saw to swerve or stall under

pressure. Always use the appropriate type of

saw blade for the workpiece material and

type of cut.

• When cutting pipe or conduit, make sure that

they are free from water, electrical wiring,

etc.

• Do not touch the workpiece or the blade

immediately after operating the tool. They

can become very hot.

• Be aware of hidden hazards, before cutting

into walls, ﬂoors or ceilings, check for the

location of wiring and pipes.

• The blade will continue to move after

releasing the switch. Always switch the tool

off and wait for the saw blade to come to a

complete standstill before putting the tool

down.

Warning! Contact with, or inhalation of dusts

arising from cutting applications may endanger

the health of the operator and possible

bystanders. Wear a dust mask speciﬁcally

designed for protection against dust and fumes

and ensure that persons within or entering the

work area are also protected.

• The intended use is described in this

instruction manual. The use of any accessory

or attachment or performance of any

operation with this tool other than those

recommended in this instruction manual may

present a risk of personal injury and/or

damage to property.

Safety of others

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning the use of the

appliance by a person responsible for the

their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

Vibration

The declared vibration emission values stated in

the technical data and the declaration of

conformity have been measured in accordance

with a standard test method provided by EN

60745 and may be used for comparing one tool

with another. The declared vibration emission

value may also be used in a preliminary

assessment of exposure.

Warning! The vibration emission value during

actual use of the power tool can differ from the

declared value depending on the ways in which

the tool is used. The vibration level may increase

above the level stated.

When assessing vibration exposure to determine

safety measures required by 2002/44/EC to

protect persons regularly using power tools in

employment, an estimation of vibration exposure

should consider, the actual conditions of use and

the way the tool is used, including taking account

of all parts of the operating cycle such as the

times when the tool is switched off and when it is

running idle in addition to the trigger time.

Labels on tools

Warning! To reduce the risk of injury,

the user must read the instruction

manual.

1 2 3 4 5 6 7 8 9 10 11 12 ... 38 39

Commentaires sur ces manuels

Pas de commentaire