Black & Decker GL710 Manuel d'instructions télécharger pdf (Page 6)

ENGLISH

u Never touch the cutting line while the appliance is running.

u Do not put the appliance down until the cutting line has

come to a complete standstill.

u Use only the appropriate type of cutting line.

Never use metal cutting line or shing line.

u Be careful not to touch the line trimming blade.

u Take care to keep the mains cable away from the cutting

line. Always be aware of the position of the cable.

u Keep hands and feet away from the cutting line at all

times, especially when switching on the motor.

u Before using the appliance and after any impact, check for

signs of wear or damage and repair as necessary.

u Never operate the appliance with damaged guards or

without guards in place.

u Take care against injury from any device tted for trimming

the lament line length. After extending new cutter line

always return the machine to its normal operating position

before switching on.

u Always ensure that the ventilation slots are kept clear of

debris.

u Do not use the lawn trimmer (edge trimmer), if the cords

are damaged or worn.

u Keep extension cords away from cutting elements.

Labels on appliance

The following warning symbols are found on the appliance:

Read the manual prior to operation.

Wear safety glasses or goggles when operating this

appliance.

Keep people and animals at least 6 m away from the

cutting area.

Do not expose the appliance to rain or high humidity.

Electrical safety

This appliance is double insulated; therefore no earth

wire is required. Always check that the power supply

corresponds to the voltage on the rating plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This appliance includes some or all of the following features.

1. On/off switch

2. Handle

3. Cable restraint

4. Power inlet

5. Secondary handle

6. Adjustment button

7. Tube

8. Guard

9. Line trimming blade

10. Spool housing

11. Cutting line

12. Edge guide

Assembly

Warning! Before assembly, make sure that the appliance is

switched off and unplugged.

Fittingtheguard(g.A)

u Remove the hexagonal screws (13) from the head (14).

u Place the guard (8) onto the appliance as shown.

u Firmly press the guard until it snaps into place.

u Secure the guard with the hexagonal screws.

u Tighten the hexagonal screws using the hexagonal key

(15) provided.

Warning! Never use the appliance unless the guard is

properly tted.

Releasing the cutting line

In transit, the cutting line is taped to the spool housing.

u Remove the tape holding the cutting line (11) to the spool

housing (10).

Connecting the appliance to the mains

u Connect the female plug of a suitable extension cable to

the power inlet (4).

u Loop the cable through the cable restraint (3).

u Insert the mains plug into a mains outlet.

Warning! The extension cable must be suitable for outdoor use.

Residualrisks.

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

u Injuries caused by touching any rotating/moving

parts.

u Injuries caused when changing any parts, blades or

accessories.

u Injuriescausedbyprolongeduseofatool.When

using any tool for prolonged periods ensure you take

regularbreaks.

u Impairmentofhearing.

1 2 3 4 5 6 7 8 9 10 11 ... 79 80

Commentaires sur ces manuels

Pas de commentaire

Black & Decker GL710 Manuel d'instructions Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Tondeuses à gazon Black & Decker GL710