6
ENGLISH
(Original instructions)
source.
The router is equipped with a spindle lock feature
that makes changing bits easy. Lock the spindle
shaft by depressing the spindle lock button as shown
in and use the supplied wrench to loosen
(counterclockwise) the collet nut.
• Keepthespindlelockbutton(2)depressedandrotate
the spindle until the spindle lock fully engages.
• Placetherouterupsidedownonasmooth,flatsurface.
• Loosenthecolletnut(4)usingthewrenchprovided.
Insert the shank of the router bit into the collet (4).
• Wheninstallingrouterbits,besuretheyareinsertedasfaraspossibleandthenpulledoutabout
1/16”(1.5mm).
• Keepthespindlelockbutton(2)depressedandtightenthecolletnutclockwise(donotover-tighten)
using the wrench provided.
• Keepthespindlelockbutton(2)depressed.
• Placetherouterupsidedownonasmooth,flatsurface.
• Loosen(counterclockwise)thecolletnut(4)usingthewrenchprovided.
• Releasebuttonandremovebit.
installing attachments or accessories.
1.Keepthespindlelockbutton(2)depressedand
rotate the router base (8) as shown in .
Rotating the base clockwise will increase the routing
depth while rotating the base\counterclockwise will
decrease the depth. Two complete revolutions of
the base equals about 2 millimeters.
C
B
Commentaires sur ces manuels