Black & Decker Fire Storm 492777-00 Manuel d'instructions télécharger pdf (Page 12)

USING THE ROUTER WITH DUST EXTRACTION

• When using dust extraction, be sure that the vacuum cleaner is out of the way and secure

so that it will not tip over or interfere with the router or workpiece. The vacuum hose and

power cord must also be positioned so that they don't interfere with the router or

workpiece. If the vacuum cleaner or vacuum hose cannot be positioned properly, it should

be removed.

• Turn on vacuum cleaner before router.

• Empty the vacuum cleaner as necessary.

HINTS FOR OPTIMUM USE

When working on outside edges, move the tool counterclockwise (fig. K). When working on

inside edges, move the tool clockwise.

• Use HSS (high speed steel) router bits for softwood.

• Use TCT (tungsten carbide tipped) router bits for hardwood.

• You can use the tool without a guide (fig. L). This is useful for sign writing and creative

work. Only make shallow cuts.

• Refer to the table below for common types of router bits.

ROUTER BITS (FIG. M) (NOT INCLUDED)

• Do not use router bits with a diameter greater than 1-5/8” (41mm). Use of larger than

recommended bits can result in a hazard.

Description

Application

Straight bit (1) Grooves and rabbets

Trimming bit (2) Trimming laminates or hardwood; accurate profiling using a

template

Rabbiting bit (3) Rabbets on straight or curved workpieces

V-grooving bit (4) Grooves, engraving and edge beveling

Core box bit (5) Fluting, engraving and decorative edge moulding

Cove bit (6) Decorative edge moulding

Ogee moulding bit (7) Decorative edge moulding

Rounding over bit (8) Rounding over edges

Dovetail bit (9) Dovetail joints

Chamfer bit (10) Chamfer edges

Troubleshooting

Problem Possible

Cause Possible

Solution

• Unit will not start. • Cord not plugged in. • Plug in cord.

• Circuit fuse is blown. • Replace circuit

fuse.

• Circuit breaker is tripped. • Reset circuit

breaker.

• Cord or switch is damaged. • Have cord or

switch replaced

at Black &Decker

Service Center or

Authorized

Servicer

For assistance with your product, visit our website www.black&decker.com for the

location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

MAINTENANCE

Your tool has been designed to operate over a long period of time with a minimum of

maintenance. Continuous satisfactory operation depends upon proper tool care and

regular cleaning.

WARNING: To prevent personal injury, always disconnect plug from power source

before performing any maintenance. Failure to do so could result in accidental

starting and possible injury.

492777-00 FS1200RP Router 2/6/06 1:02 PM Page 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Black & Decker Fire Storm 492777-00 Manuel d'instructions Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker Fire Storm 492777-00