Black & Decker GL301 Manuel d'instructions télécharger pdf (Page 7)

ENGLISH

u Before use, check the power supply cord and extension

cord for signs of damage, ageing and wear. If a cord

becomes damaged during use, disconnect the cord from

the mains supply immediately. DO NOT TOUCH THE

CORD BEFORE DISCONNECTING THE SUPPLY.

u Do not use the appliance if the cords are damaged or worn.

u Wear stout shoes or boots to protect your feet.

u Wear long trousers to protect your legs.

u Before using the appliance, check that your cutting path is

free from sticks, stones, wire and any other obstacles.

u Only use the appliance in the upright position, with the

cutting line near the ground. Never switch the appliance

on in any other position.

u Move slowly when using the appliance. Be aware that

freshly cut grass is damp and slippery.

u Do not work on steep slopes. Work across the face of

slopes, not up and down.

u Never cross gravel paths or roads while the appliance is

running.

u Never touch the cutting line while the appliance is running.

u Do not put the appliance down until the cutting line has

come to a complete standstill.

u Use only the appropriate type of cutting line.

Never use metal cutting line or shing line.

u Be careful not to touch the line trimming blade.

u Take care to keep the mains cable away from the cutting

line. Always be aware of the position of the cable.

u Keep hands and feet away from the cutting line at all

times, especially when switching on the motor.

u Before using the appliance and after any impact, check for

signs of wear or damage and repair as necessary.

u Never operate the appliance with damaged guards or

without guards in place.

u Take care against injury from any device tted for trimming

the lament line length. After extending new cutter line

always return the machine to its normal operating position

before switching on.

u Always ensure that the ventilation slots are kept clear of

debris.

u Do not use the lawn trimmer (edge trimmer), if the cords

are damaged or worn.

u Keep extension cords away from cutting elements.

Labels on appliance

The following warning symbols are found on the appliance:

Read the manual prior to operation.

Wear safety glasses or goggles when operating this

appliance.

Keep people and animals at least 6 m away from the

cutting area.

Do not expose the appliance to rain or high humidity.

Electrical safety

This appliance is double insulated; therefore no earth

wire is required. Always check that the power supply

corresponds to the voltage on the rating plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This appliance includes some or all of the following features.

1. On/off switch

2. Handle

3. Cable restraint

4. Power inlet

5. Secondary handle

6. Tube

7. Storage hooks

8. Adjustment button

9. Guard

10. Line trimming blade

11. Cutting line

12. Spool housing

13. Edge guide

14. Head

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Attachingthetubetothehead(g.A)

u Align the rectangular tab of the tube (6) with the location in

the head (14).

u Insert the tube into the head and push until it clicks into place.

Attachingthehandletothetube(g.B)

u Align the square tab of the tube (6) with the location in the

handle (2).

u Insert the tube into the handle and push until it clicks into

place.

Fittingtheguard(g.C)

u Remove the screw (15) from the head.

u Place the guard onto the tool as shown.

u Firmly press the guard (9) until it snaps into place.

1 2 3 4 5 6 7 8 9 10 11 12 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Black & Decker GL301 Manuel d'instructions Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Tondeuses à gazon Black & Decker GL301