Black & Decker MT250 Manuel d'instructions télécharger pdf (Page 6)

ENGLISH

(Original instructions)

Vibration

The declared vibration emission values stated in the technical

data and the declaration of conformity have been measured

in accordance with a standard test method provided by

EN 60745 and may be used for comparing one tool with

another. The declared vibration emission value may also be

used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following pictograms are shown on the tool:

Warning! To reduce the risk of injury, the user

must read the instruction manual.

Warning! Always wear a dust mask when using

this tool.

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. On/Off switch

2. Variable speed dial

3. Super-lok

Tool free accessory clamping lever

4. Sanding base

5. Dust extraction adapter

6. Tooled accessory adapter (spacer)

7. Tooled accessory adapter (Fixing bolt)

Accessories

This tool includes some or all of the following accessories.

The performance of your tool depends on the accessory used.

Black & Decker and Piranha accessories are engineered to

high quality standards and designed to enhance the perform-

ance of your tool. By using these accessories you will get the

very best from your tool.

Precision plunge cut saw blade for

wooden materials, soft plastics.

(Part number - X26105-XJ)

Separating, plunge and ush cutting

of wood and soft plastics. Ideal for

working on doors, skirting boards,

windowsills and ooring.

Plunge cut saw blade for wood and

metal. (Part number - X26110-XJ)

Separating, plunge and ush cutting

of wood, plastics, thin-walled

non-ferrous pipes and extrusions,

nails and screws.

Plunge cut saw blade for wood and

metal.

(Part number - X26115-XJ)

Separating, plunge and ush cutting

of wood, plastics, thin-walled

non-ferrous pipes and extrusions.

Segmented saw blade.

(Part number - X26120-XJ)

Long life blade which is ideal for

cutting wood, plastics, thin walled

ferrous and non-ferrous material.

Rigid scraper.

(Part number - X26135-XJ)

Ideal for removal of hard and soft

material from at surfaces such as

the removal of vinyl ooring, bonded

carpet adhesive, tile oor adhesive,

grout, paint and varnish.

Flexible scraper.

(Part number - X26140-XJ)

Ideal for removal of elastomer

materials from hard at surfaces in

difcult to reach areas such as silicon

sealant and other caulking materials.

1 2 3 4 5 6 7 8 9 10 11 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Black & Decker MT250 Manuel d'instructions Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker MT250