Black & Decker LI2000 Manuel d'instructions télécharger pdf (Page 8)

All Black & Decker Service Centers are

staffed with trained personnel to provide

customers with efficient and reliable power

tool service. Whether you need technical

advice, repair, or genuine factory replacement

parts, contact the Black & Decker location

nearest you. To find your local service

location, refer to the yellow page directory

under“Tools—Electric”orcall:1-800-544-

6986 or visit www.blackanddecker.com

Black & Decker (U.S.) Inc. warrants this

product for two years against any defects

in material or workmanship. The defective

product will be replaced or repaired at no

charge in either of two ways.

The first, which will result in exchanges

only, is to return the product to the retailer

from whom it was purchased (provided that

the store is a participating retailer). Returns

should be made within the time period of

SERVICE INFORMATION

FULL TWO-YEAR HOME USE WARRANTY

ACCESSORIES

THE RBRC™ SEAL

Recommended accessories for use with

your tool are available from your local

dealer or authorized service center. If you

need assistance regarding accessories,

please call: 1-800-544-6986.

WARNING: The use of any accessory

not recommended for use with this tool

could be hazardous.

TROUBLESHOOTING

Problem Possible Cause Possible Solution

•Batterywillnotcharge. •Chargernotpluggedinto  •Plugchargerintoa 

a working outlet. working outlet. Refer to

“Important Charging

       Notes”formoredetails. 

       •Checkcurrentat 

receptacle by plugging in

a lamp or other appliance.

        •Checktoseeif 

receptacle is connected to

a light switch which turns

power off when you turn

out the lights.

    •Chargerjacknotfullyplugged •Check to be sure

into tool charging socket. charger plug is fully

inserted into tool

charging socket.

For assistance with your product, visit our website www.blackanddecker.com for the

location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

The RBRC™ (Rechargeable

Battery Recycling Corporation) Seal

onthelithium-ionbattery(orbattery

pack) indicates that the costs to

recycle the battery (or battery pack) at the

end of its useful life have already been

paid by Black & Decker. In some areas, it

isillegaltoplacespentlithium-ionbatteries

in the trash or municipal solid waste

stream and the RBRC program provides

an environmentally conscious alternative.

RBRC in cooperation with Black & Decker

and other battery users, has established

programs in the United States and Canada

tofacilitatethecollectionofspentlithium-ion

batteries. Help protect our environment and

conserve natural resources by returning the

tool to an authorized Black & Decker service

center for recycling. You may also contact

your local recycling center for information on

where to drop off the spent battery, or call

1-800-8-BATTERY.

Seal”).Callyourlocalretailerfordetails.

If you bring the batteries to a Black &

DeckerCompany-OwnedorAuthorized

Service Center, the Center will arrange

to recycle old batteries. Or, contact your

local municipality for proper disposal

instructions in your city/town.

To remove the battery pack for disposal:

1.) First, before attempting to disassemble

the product, turn it on and run it in either

direction until it stops to ensure a complete

discharge of the batteries.

2.) Remove the screws in the product housing

and lift the housing half from the tool.

3.) Disconnect the terminal clips from the

batteries and lift the batteries out.

4.) Place the battery in suitable packaging to

prevent a short circuit of the battery terminals.

5.) Dispose of batteries as per

recommended guidelines.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Black & Decker LI2000 Manuel d'instructions Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker LI2000