Black & Decker KX2200 Manuel d'instructions télécharger pdf (Page 9)

9

ENGLISH

• When the paint softens, remove the paint

using a scraper. Scrape the softened paint

immediately or it will harden again.

• Scrape with the grain of the wood wherever

possible.

• Do not allow paint and debris to collect on

the scraper.

• When scraping from a vertical position,

scrape downwards to prevent the paint from

falling back into the nozzle.

• When stripping paint from a surface next to

glass, take the necessary measures to

protect the glass from the heat.

Warning! Use a glass protector nozzle when

stripping paint from metal or wood framed

windows.

• Dispose of all paint debris safely and make

sure that the work area is thoroughly clean

after use.

Cooling down

During use, the nozzle of the tool becomes

extremely hot. After switching off, leave the tool

to cool down for at least 30 minutes.

• Place the tool with the nozzle up on a

surface where it cannot be tipped over.

• To speed up the cooling time, run the tool on

a low minimum temperature setting for a few

minutes before switching off.

Maintenance

Your Black & Decker appliance has been

designed to operate over a long period of time

with a minimum of maintenance. Continuous

satisfactory operation depends upon proper care

and regular cleaning of the appliance.

Warning! Switch off and unplug the appliance

and allow it to cool down before doing any

maintenance on the appliance.

• Regularly clean the ventilation slots in your

appliance using a soft brush or dry cloth.

• To clean the appliance, use only mild soap

and a damp cloth. Do not use any abrasive

or solvent-based cleaner. Never let any liquid

get inside the appliance and never immerse

any part of the appliance into liquid.

Mains Plug Replacement

If a new mains plug needs to be ﬁtted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal of

the new plug.

• Connect the blue lead to the neutral terminal.

• If the product is class l (earthed), connect the

green / yellow lead to the earth terminal.

Warning! If your product is class ll double

insulated (only 2 wires in the cord set), no

connection is to be made to the earth terminal.

Follow the ﬁtting instructions supplied with good

quality plugs.

Any replacement fuse must be of the same

rating as the original fuse supplied with the

product.

Technical Data

KX2200

(Type 1)

Input voltage Vac 220-240

Construction Class II

Power input W 2000

Temperature range ºC 65 - 650

Weight kg 0.9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 30 31

Commentaires sur ces manuels

Pas de commentaire