Black & Decker HP142K(D) Manuel d'instructions télécharger pdf (Page 8)

Know your tool

◆ Warning! When using battery-powered

tools, basic safety precautions,

including the following, should always

be followed to reduce the risk of fire,

leaking batteries, personal injury and

material damage.

◆ Read all of this manual carefully before

operating the tool.

◆ Before operating the tool, make sure

that you know how to switch the tool off

in an emergency.

◆ Retain this manual for future reference.

General

1. Keep work area clean

Cluttered areas and benches can cause

accidents.

2. Consider work area environment

Do not expose the tool to rain. Do not use the

tool in damp or wet conditions. Keep the work

area well lit. Do not use the tool where there is

a risk of causing fire or explosion, e.g. in the

presence of flammable liquids and gases.

3. Keep children away

Do not allow children, visitors or animals to

come near the work area or to touch the tool.

4. Dress properly

Do not wear loose clothing or jewellery, as these

can be caught in moving parts. Preferably wear

rubber gloves and non-slip footwear when

working outdoors. Wear protective hair

covering to keep long hair out of the way.

5. Personal protection

Always use safety glasses. Use a face or dust

mask whenever the operations may produce

dust or flying particles. Wear ear protection

whenever the sound level seems

uncomfortable.

6. Do not overreach

Keep proper footing and balance at all times.

7. Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

8. Secure workpiece

Use clamps or a vice to hold the workpiece.

It is safer and it frees both hands to operate

the tool.

9. Connect dust extraction equipment

If devices are provided for the connection of

dust extraction and collection facilities, ensure

that these are connected and properly used.

10.Remove keys and adjusting wrenches

Always check that keys and adjusting wrenches

are removed from the tool before operating

the tool.

11.Use appropriate tool

The intended use is described in this instruction

manual. Do not force small tools or attachments

to do the job of a heavy-duty tool. The tool will

do the job better and safer at the rate for

which it was intended. Do not force the tool.

Warning! The use of any accessory or

attachment or performance of any operation

with this tool other than those recommended

in this instruction manual may present a risk of

personal injury.

12.Check for damaged parts

Before use, carefully check the tool for

damage. Check for misalignment and seizure

of moving parts, breakage of parts, damage to

guards and switches and any other conditions

that may affect its operation.

Ensure that the tool will operate properly and

perform its intended function.

Do not use the tool if any part is damaged or

defective.

Do not use the tool if the switch does not turn

it on and off. Have any damaged or defective

parts repaired or replaced by an authorised

repair agent. Never attempt any repairs yourself.

13.Remove the battery

Where the design permits, remove the battery

when the tool is not in use, before changing

any parts of the tool, accessories or

attachments and before servicing.

14.Avoid unintentional starting

Do not carry the tool with a finger on the

on/off switch. Be sure that the tool is switched

off when inserting the battery into the tool.

15.Do not abuse cord

Never carry the charger by its cord or pull it to

disconnect from the socket. Keep the cord

away from heat, oil and sharp edges.

ENGLISH

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

Black & Decker HP142K(D) Manuel d'instructions Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker HP142K(D)