Black & Decker GKC1817 Manuel d'instructions télécharger pdf (Page 5)

ENGLISH

(Original instructions)

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5. Service

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Additional power tool safety warnings

Warning! Additional safety warnings for jigsaws

and reciprocating saws

 Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

may contact hidden wiring or its own cord.

Cutting ac-

cessory contacting a “live” wire may make exposed metal

parts of the power tool “live” and could give the operator

an electric shock.

 Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding the

work by hand or against your body leaves it unstable and

may lead to loss of control.

 Keep hands away from cutting area. Never reach

underneath the work piece any reason. Do not insert

and blade clamp. Do not stabilize the saw by gripping the

shoe.

 Keep blades sharp. Dull or damaged blades may cause

the saw to swerve or stall under pressure. Always use the

appropriate type of saw blade for the workpiece material

and type of cut.

 When cutting pipe or conduit, make sure that they are

free from water, electrical wiring, etc.

 Do not touch the workpiece or the blade immediately

after operating the tool. They can become very hot.

 Be aware of hidden hazards, before cutting into walls,

pipes.

 The blade will continue to move after releasing the

switch. Always switch the tool off and wait for the saw

blade to come to a complete standstill before putting the

tool down.

Warning! Contact with, or inhalation of dusts arising from cut-

ting applications may endanger the health of the operator and

for protection against dust and fumes and ensure that persons

within or entering the work area are also protected.

 The intended use is described in this instruction manual.

The use of any accessory or attachment or performance

of any operation with this tool other than those recom-

mended in this instruction manual may present a risk of

personal injury and/or damage to property.

Safety of others

 This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental capa-

bilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use

of the appliance by a person responsible for their safety.

 Children should be supervised to ensure that they do not

play with the appliance.

Residual risks.

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

 Injuries caused by touching any rotating/moving parts.

 Injuries caused when changing any parts, blades or ac-

cessories.

 Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods ensure you take regular

breaks.

 Impairment of hearing.

 Health hazards caused by breathing dust developed when

using your tool (example:- working with wood, especially

oak, beech and MDF.)

Vibration

The declared vibration emission values stated in the technical

data and the declaration of conformity have been measured

in accordance with a standard test method provided by

EN 60745 and may be used for comparing one tool with

another. The declared vibration emission value may also be

used in a preliminary assessment of exposure.

Power to the tool should always be supplied via residual

current device with a rated residual current of 30mA or

less.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Black & Decker GKC1817 Manuel d'instructions Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker GKC1817