Black & Decker Drill DR260B Manuel d'utilisateur télécharger pdf (Page 7)

Keyless single sleeve chuck (DR340)

This tool is equipped with a feature that automatically locks the spindle when the tool is

not running. This feature is a normal condition which allows for tightening or loosening of

the chuck with one hand while holding the drill with the other.

• Tochangeaccessories,loosenthechuckbyrotatingthesleevecounterclockwiseas

viewed from the chuck end.

• Inserttheaccessoryshaftintothechucktoabout3/4in.(19mm)depth,centeredinthe

jaws.

• Tightensecurelybyrotatingthesleeveintheclockwisedirectionasviewedfromthe

chuck end.

Chuck and key (DR560) (fig. D)

• Openthechuck(4)byturningthecollar

counterclockwise (when viewed from the

chuck end).

• Inserttheaccessoryshaftintothechuckto

about 3/4 in. (19 mm) depth, centered in the

jaws.

• Tightenchuckcollarbyhand.Placechuck

key (7) into each of the three holes and

securely tighten in a clockwise direction.

NOTE: Tighten chuck with all three holes to

prevent slippage.

Removing and attaching the chuck (fig. E)

Keyless chuck (DR260, DR340)

• Openthechuck(4)asfaraspossible.

• Removethechuckretainingscrew(11),

located in the chuck, by turning it clockwise

using a screwdriver (lefthand thread).

• Tightenanallenkey(12)of1/4in.(6mm)or

greater size (not supplied) into the chuck

and strike it with a soft hammer (13) in a

clockwise direction as shown.

• Removetheallenkey.

• Removethechuckbyturningit

counterclockwise.

• Toattachthechuck,screwitontothespindle

and secure it with the chuck retaining screw.

Keyed chuck (DR560) (fig. F)

• Placechuckkey(7)inanyoneofthethreeholesinthechuck(4).

• Usingasofthammer(13),strikethekeyin

a clockwise direction. This will loosen the

screw (11) inside the chuck.

• Openchuckjawsfullyandremovethe

chuck retaining screw, located in the chuck,

by turning it clockwise using a screwdriver

(lefthand thread).

• Placekeyinchuck.Usingasofthammer

(13), strike key sharply in a counterclockwise

direction.

• Removethechuckbyturningit

counterclockwise.

• Toattachthechuck,screwitontothespindle

and secure it with the chuck retaining screw.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Black & Decker Drill DR260B Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker Drill DR260B