Black & Decker GT6530 Manuel d'instructions télécharger pdf (Page 4)

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Additional safety instructions for hedgetrimmers

Wear safety glasses or goggles when operating this

tool.

Wear gloves when operating this tool.

Wear ear protection when operating this tool.

Immediately disconnect the cable from the mains if

it is damaged or cut.

Do not expose the tool to rain or high humidity.

◆ Keep the cable away from the blades while using this

tool.

◆ If you have not used a hedgetrimmer before, preferably

seek practical instruction by an experienced user in

addition to studying this manual.

◆ Never touch the blades while the tool is running.

◆ Never attempt to force the blades to come to a standstill.

◆ Do not put the tool down until the blades have come to a

complete standstill.

◆ Regularly check the blades for damage and wear. Do not

use the tool when the blades are worn or damaged.

◆ Take care to avoid hard objects (e.g. metal wire, railings)

when trimming. Should you accidentally hit any such

object, immediately switch the tool off, unplug it and

check for any damage.

◆ Should the tool start to vibrate abnormally, immediately

switch it off and check for any damage.

◆ If the tool stalls, immediately switch it off. Unplug the

tool before attempting to remove any obstructions.

◆ After use, place the blade sheath supplied over the

blades. Store the tool, making sure that the blade is not

exposed.

◆ Always ensure that all handles and guards are fitted

when using the tool. Never attempt to use an incomplete

tool or a tool with unauthorised modifications.

◆ Never allow children to use the tool.

◆ When operating the extending handle, hold the unit away

from your body and loose clothes.

◆ Be aware of falling debris when cutting the higher sides

of a hedge.

Additional safety instructions for Australia and

New Zealand

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Handle switch

2. Trigger switch

3. Extending handle

4. Front handle release buttons

5. Rear handle release buttons

6. Blade

7. Blade sheath

This hedgetrimmer has the following features for your benefit:

◆ Dual action blades for reduced vibration.

◆ Laser cut and diamond ground blades for improved

cutting.

◆ Extending handle for cutting the higher sides of hedges.

Use

Changing the position of the extending handle

Warning! Before changing the position of the extending

handle, make sure that the tool is switched off and unplugged.

Rotating the handle into the extended position

(fig. A1 & A2)

Your hedgetrimmer will reach you with the handle in the

forward position. To move the handle into the extended

position, proceed as follows:

◆ Support the underside of the unit with one hand.

◆ Simultaneously press the front handle release buttons (4)

with your thumb and middle finger and rotate the handle

(3) backward with your other hand.

◆ Move the handle fully into the extended position. Make

sure the handle clicks and locks into place.

Rotating the handle into the forward position (fig. B1 & B2)

To move the handle from the extended into the forward

position, proceed as follows:

◆ Support the underside of the unit with one hand.

◆ Simultaneously press the rear handle release buttons (5)

with the thumb and index finger of your other hand and

rotate the handle (3) forward. As you move the handle out

of the extended position you will hear a click.

◆ Move the handle fully into the forward position.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Black & Decker GT6530 Manuel d'instructions Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker GT6530