Black & Decker DR260 Instructions d'exploitation télécharger pdf (Page 3)

Drain-Rooter™

“W”.

These cords are rated for outdoor use

and reduce the risk of electric shock.

Use only three-wire extension cords which

have three-prong grounding plugs and

three-pole receptacles which accept the

tool’s plug.

Use of other extension cords will

not ground the tool and increase the risk of

electric shock.

Use proper extension cords.

Insufficient

conductor size will cause excessive voltage

drop and loss of power.

Extension cords are not recommended

unless they are plugged into a Ground Fault

Circuit Interrupter (GFCI) found in circuit

boxes or outlet receptacles.

The GFCI on the

machine power cord will not prevent electric

shock from the extension cords.

10.

Keep all electric connections dry and off the

ground. Do not touch plugs or tools with

wet hands.

Reduces the risk of electric shock.

Personal Safety

Stay alert, watch what you are doing and

use common sense when operating a power

tool. Do not use tool while tired or under

the influence of drugs, alcohol, or

medication.

A moment of inattention while

operating power tools may result in serious

personal injury.

Dress properly. Do not wear loose clothing

or jewelry. Contain long hair. Keep your

hair, clothing, and gloves away from moving

parts.

Loose clothes, jewelry, or long hair can

be caught in moving parts.

Avoid accidental starting. Be sure switch is

off before plugging in.

Plugging in tools that

have the switch on invites accidents.

Remove adjusting keys or switches before

turning the tool on.

A wrench or key that is

left attached to a rotating part of the tool may

result in personal injury.

Do not overreach. Keep proper footing and

balance at all times.

Proper footing and

balance enables better control of the tool in

unexpected situations.

Use safety equipment. Always wear eye

protection.

Dust mask, non-skid safety shoes,

hard hat, or hearing protection must be used for

appropriate conditions.

Tool Use and Care

Use clamp or other practical way to secure

and support the workpiece to a stable

platform.

Holding the work by hand or against

your body is unstable and may lead to loss of

control.

Do not force tool. Use the correct tool for

your application.

The correct tool will do the

job better and safer at the rate for which it is

designed.

Do not use tool if switch does not turn it on

or off.

Any tool that cannot be controlled with

the switch is dangerous and must be repaired.

Disconnect the plug from the power source

before making any adjustments, changing

accessories, or storing the tool.

Such

preventative safety measures reduce the risk of

starting the tool accidentally.

Store idle tools out of reach of children and

other untrained persons.

Tools are

dangerous in the hands of untrained users.

Maintain tools with care. Keep cutting tools

sharp and clean.

Properly maintained tools,

with sharp cutting edges are less likely to bind

and are easier to control.

Check for misalignment or binding of

moving parts, breakage of parts, and any

other condition that may affect the tool’s

operation. If damaged, have the tool

serviced before using.

Many accidents are

caused by poorly maintained tools.

Use only accessories that are recommended

by the manufacturer for your model.

Accessories that may be suitable for one tool

may become hazardous when used on another

tool.

Inspect tool and extension cords

periodically and replace if damaged.

Damaged cords increase risk of electrical

shock.

10.

Keep handles dry and clean; free from oil

and grease.

Allows for better control of the

tool.

11.

Store tools in dry place.

Such measures

reduce the risk of electrical shock.

Tool Service

Tool service must be performed only by

qualified repair personnel.

Service or

maintenance performed by unqualified repair

personnel could result in injury.

When servicing a tool, use only identical

replacement parts. Follow instructions in

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Black & Decker DR260 Instructions d'exploitation Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Perceuses électriques Black & Decker DR260