Black & Decker X810 Manuel d'utilisateur télécharger pdf (Page 4)

ENGLISH

 Let the appliance cool down before leaving it unattended

and before cleaning or inspecting any parts of the appliance.

 The power supply cord should not touch the hot soleplate

during use or during the cool down period.

 Do not touch the soleplate until it has cooled down.

 Wait until the appliance has cooled down before emptying

the water tank as the water may still be hot.

 Always diconnect the appliance from the supply before

ﬁlling, emptying, cleaning, or carying out any maintenance

on the appliance.

Features

1. Temperature control dial

2. Heating light

3. Self-clean button

4. Steam control dial

5. Steam burst button

6. Spray button

7. Water tank cover

8. Spray nozzle

9. Soleplate

10. Water tank

11. Maximum ﬁlling level indicator

12. Cord storage

13. Heel rest

Before ﬁrst use

Cleaning the soleplate

 Make sure that the appliance is unplugged.

 Fill the appliance with water as described below.

 Use the self-clean system as described below. When

ﬁnished, wipe the soleplate and steam vents with a cloth.

Some parts of the appliance have been lightly greased and as

a result the appliance may smoke slightly when switched on

for the ﬁrst time. This will cease after a short while.

Assembly

Warning! Before assembly, make sure that the appliance is

switched off and unplugged.

Filling the water tank (ﬁg. A)

In order to be able to use the steam function or the spray

feature, you will ﬁrst need to ﬁll the water tank with water.

 Make sure that the appliance is unplugged.

 Open the water tank cover (7).

 Hold the appliance at an angle as shown.

 Fill the appliance with water using the beaker provided.

 Close the water tank cover.

Warning! Never ﬁll above the maximum ﬁlling level (11).

Normal tap water can be used, but if you live in a hard water

area the use of distilled water is recommended.

Do not use chemically descaled water.

Use

Warning! Do not leave the appliance unattended while it is

connected to the power supply and during the cool down

period.

Temperature setting

The required temperature setting depends on the garment

fabric.

 Adjust the temperature control dial (1) to the required

setting:

• Synthetics

•• Silk/wool

••• Cotton/Linen

If you are unsure of the ﬁbre content of a garment, start with

a low temperature setting and test on a small area (seam or

inside hem). If wrinkles remain, gradually increase the heat

setting until you ﬁnd the optimum setting.

Using as a dry iron

 Stand the appliance on its heel rest (13).

 Plug the appliance in and switch on.

 Set the steam control dial (4) to the 'O' position.

 Adjust the temperature control dial (1) to the required

setting.

The heating light (2) will switch off when the appliance has

reached the required temperature.

Using as a steam iron

 Fill the water tank as described above.

 Stand the appliance on its heel rest (13).

 Plug the appliance in and switch on.

 Adjust the temperature control dial (1) to the required

steam setting.

The heating light (2) will switch on. When the heating light

switches off, the iron will be ready for use as a steam iron.

The heating light will regularly switch on and off whilst ironing.

 To create steam, set the steam control dial (4) to the

required steam position.

Using the steam burst button

The steam burst feature can only be used whilst ironing on a

high temperature setting.

 Make sure that there is water in the tank and the

temperature control dial (1) is set to the steam position.

 Lift the appliance and press the steam burst button (5).

You may need to press a few times to activate the pump.

Using the spray button

The spray feature can be used at any temperature setting

when either steam or dry ironing.

 Make sure that there is water in the tank.

1 2 3 4 5 6 7 8 9 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Black & Decker X810 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Fers à repasser Black & Decker X810