Black & Decker PW1500 Manuel de service télécharger pdf (Page 6)

PW1500SP

1500W High Pressure Washer

TECHNICAL DATA

Technical Data (EN)

PW1500

8,5

1,5

9,4

Class F

IPX5

220-240/50-60

81,2

3,72

Output

Pressure

Maximum pressure

Power

T° input

Maximum input pressure

Repulsive force of the gun to the maximum pressure

Motor Insulation

Motor Protection

Voltage

Sound level:

(EN 60704-1)

Unit vibrations

Weight

Unit

L/min

MPa

°C

MPa

V/Hz

Db (A)

M/s

SAFETY INSTRUCTIONS

When using power tools, always observe the safety regulations

applicable in your country to reduce the risk of re, electric shock,

personal injury and material damage. Read the following safety

instructions before attempting to operate this product. Keep these

instructions in a safe place!

The following symbols are used throughout this manual:

Denotes risk of personal injury, loss of life or damage to the tool in

case of non-observance of the instructions in this manual.

Denotes risk of electric shock.

Fire hazard

2.1 Work Area

2.1.1

2.1.2

2.1.3

Keep work area clean and bright. Cluttered areas and benches

can cause accidents. Keep work area well lit (250-300 Lux).

Do not operate power tools in explosive atmospheres, such as

in the presence of ammable liquids, gases or dust. Power tools

create sparks that may ignite the dust or fumes.

Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

2.2 Electrical Safety

2.2.1

2.2.2

2.2.3

2.2.4

2.2.5

Power tool plugs must match the outlet. Never modify the plug

in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodied plugs and matching outlets

will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces such as

pipes, radiators, ranges and refrigerators. There is an increased

risk of electric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling

or unplugging the power tool. Keep cord away from heat, oil,

sharp edges or moving parts. Damaged or entangled cords increase

the risk of electric shock.

When operating a power tool outdoors, use an extension cord

suitable for outdoor use. Use of a cord suitable for outdoor use

reduces the risk of electric shock.

2.3 Personal Safety

2.3.1

Stay alert. Watch what you are doing. Use common sense. Do

not operate the tool when you are tired or under the inuence

of drugs, alcohol or medication. A moment of inattention while

operating power tools may result in serious personal injury.

6 English

2.5 Battery tool use and care

2.5.1

2.5.2

2.5.3

2.5.4

2.5.5

Ensure the switch is in the o position before inserting battery

pack. Inserting the battery pack into power tools that have the

switch on invites accidents.

Recharge only with the charger specied by the manufacturer.

A charger that is suitable for one type of battery pack may create a

risk of re when used with another battery pack.

Use power tools only with specically designated battery

packs. Use of any other battery packs may create a risk of injury and

re.

When battery pack is not in use, keep it away from other metal

objects like paper clips, coins, keys, nails, screws, or other small

metal objects that can make a connection from one terminal to

another. Shorting the battery terminals together ma cause burns

or a re.

Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs, ush with

water. If liquid contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or burns.

2.3.2

2.3.3

2.3.4

2.3.5

2.3.6

2.3.7

2.3.8

Use safety equipment. Always wear eye protection. Everyday

eyeglasses only have impact resistant lenses, they are not safety

glasses. Contain long hair. Safety equipment such as dust mask,

non-skid safety shoes, hardhat, heat-resistant apron or hearing

protection used for appropriate conditions will reduce personal

injuries.

Avoid accidental starting. Ensure the switch is in the o

position before plugging in. Carrying power tools with your

nger on the switch or plugging in power tools that have the switch

on invites accidents.

Remove any adjusting key or wrench before turning the power

tool on. A wrench or a key left attach to a rotating part of the power

tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected

situations.

Dress property. Do not wear loose clothing or jewelery. Keep

your hair, clothing and gloves away from moving parts. Loose

clothes, jeweler or long hair can be caught in moving parts.

If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and

properly used. Use of these devices can reduce dust related

hazards.

Secure workplace. Use clamps or a vice to hold the workpiece. It is

safer and it frees both hands to operate the tool.

2.4 Power tool use and care

2.4.1

2.4.2

2.4.3

2.4.4

2.4.5

2.4.6

2.4.7

Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer

at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and

o. Any power tool that cannot be controlled with the switch is

dangerous and must be repaired.

Disconnect the plug from the power source before making any

adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the

power tool accidentally.

Store idle power tools out of the reach of children and do not

allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that

may aect the power tools operation. If damaged, have the

power tool repaired before use. Many accidents are caused by

poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting

tools with sharp cutting edges are less likely to bind and are easier

to control.

Use the power tool, accessories and tool bits etc., in accordance

with these instructions and in the manner intended for the

particular type of power tool, taking into account the working

conditions and the work to be performed. Use of the power tool

for operations dierent from those intended could result in a

hazardous situation.

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Commentaires sur ces manuels

Pas de commentaire

Black & Decker PW1500 Manuel de service Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Nettoyeurs haute pression Black & Decker PW1500