Black & Decker PW1500 Manuel de service télécharger pdf (Page 7)

7English

GENERAL INFORMATION FIG.1

3.1 Use of the manual

This manual forms an integral part of the appliance and should be

kept for future reference. Please read it carefully before installing/

using the unit. If the appliance is sold, the Seller must pass on this

manual to the new owner along with the appliance.

3.2 Delivery

The appliance is delivered partially assembled in a cardboard box.

The supply package is illustrated in g.1.

3.2.1 Documentation supplied with the appliance

A1 Use and maintenance manual

A2 Safety instructions

A3 Declaration of conformity

3.3 Disposing of packaging

The packaging materials are not environmental pollutants but must

still be recycled or disposed of in compliance with the relevant

legislation in the country of use.

3.4 Safety signs

Comply with the instructions provided by the safety signs tted to

the appliance.

Check that they are present and legible; otherwise, t replacements

in the original positions.

E1 sign – Indicates that the appliance must not be disposed of as

municipal waste; it may be handed in to the dealer on purchase of a

new appliance. The appliance's electrical and electronic parts must

not be reused for improper uses since they contain substances

which constitute health hazards.

3.4.1 Symbols

E2 symbol – Indicates that the appliance is intended for

professional use, i.e. for experienced people informed

about the relative technical, regulatory and legislative

aspects and capable of performing the operations neces-

sary for the use and maintenance of the appliance.

E3 symbol – Indicates that the appliance is intended for

non-professional (domestic) use.

TECHNICAL INFORMATION FIG.1

4.1 Envisaged use

This appliance has been designed for individual use for the cleaning

of vehicles, machines, boats, masonry, etc, to remove stubborn dirt

using clean water and biodegradable chemical detergents.

Vehicle engines may be washed only if the dirty water is disposed of

as per regulations in force.

- Intake water temperature: see data plate on the appliance.

- Intake water pressure: below 10 bar.

- Operating ambient temperature: above 0°C.

The appliance is compliant with the EN 60335-2-79/A1 standard.

4.2 Operator

The symbol on the front cover identies the appliance’s intended

operator (professional or non-professional).

4.3 Improper use

Use by unskilled persons or those who have not read and under-

stood the instructions in the manual is forbidden.

The introduction of inammable, explosive and toxic liquids into the

appliance is prohibited.

Use of the appliance in a potentially inammable or explosive

atmosphere is forbidden.

The use of non-original spare parts and any other spare parts not

specically intended for the model in question is prohibited.

All modications to the appliance are prohibited. Any modications

made to the appliance shall render the Declaration of Conformity

2.6 Service

2.6.1

Have your power tool serviced by a qualied repairperson

using only identical replacement parts. This will ensure that the

safety of the power tool is maintained.

null and void and relieve the manufacturer of all liability under civil

and criminal law.

4.4 Main components

B1 Adjustable spray nozzle

B2 Lance

B3 Gun with safety catch

B4 Power supply cable with plug

B5 High pressure hose

B6 Detergent tank (on models with this feature)

4.4.1 Accessories (where applicable – see g.1).

C1 Nozzle cleaning tool

C2 Rotating nozzle kit

C3 Handle

C4 Brush

C5 Hose reel

4.5 Safety devices

Caution - Danger!

Do not tamper with or adjust the safety valve set-

ting.

- Safety valve and pressure limiting valve.

The safety valve is also a pressure limiting valve. When the gun

trigger is released, the valve opens and the water recirculates

through the pump inlet.

- Safety catch (D): prevents accidental spraying of water.

INSTALLATION FIG.2

5.1 Assembly

Caution - Danger!

All installation and assembly operations must be

performed with the appliance disconnected from the mains

power supply.

The assembly sequence is illustrated in g.2.

5.2 Assembling the rotating nozzle

(For models with this feature)

The rotating nozzle kit delivers greater washing power.

5.3 Electrical connection

Caution - Danger!

Check that the electrical supply voltage and frequen-

cy (V-Hz) correspond to those specied on the appliance

data plate (g.2). The appliance should only be connected

to a mains power supply equipped with an adequate earth

connection and a dierential security breaker (30 mA)

to cut o the electricity supply in the instance of a short

circuit.

5.3.1 Use of extension cables

Use cables featuring “IPX5” protection level.

The cross-section of the extension cable should be pro-

portionate to its length; the longer it is, the greater its

cross-section should be. See table I.

5.4 Water supply connection

Caution - Danger!

Only clean or ltered water should be used for intake.

The delivery of the water intake tap should be equal to that

of pump capacity.

Place the appliance as close to the water supply system as possible.

5.4.1 Connection points

Water outlet (OUTLET)

Water inlet with lter (INLET)

5.4.2 Connection to the mains water supply

The appliance can be connected directly to the mains

drinking water supply only if the supply hose is tted with

a backow preventer valve as per current regulations in

force. Make sure that the hose is at least Ø 13 mm and

that it is reinforced.

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Commentaires sur ces manuels

Pas de commentaire

Black & Decker PW1500 Manuel de service Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Nettoyeurs haute pression Black & Decker PW1500