Black & Decker ST4525 Manuel d'instructions télécharger pdf (Page 7)

7

ENGLISH

(Original instructions)

u

Only use the appliance in the upright

position, with the cutting line near the

ground. Never switch the appliance on

in any other position.

u

Move slowly when using the appliance.

Be aware that freshly cut grass is

damp and slippery.

u

Do not work on steep slopes. Work

across the face of slopes, not up and

down.

u

Never cross gravel paths or roads

while the appliance is running.

u

Never touch the cutting line while the

appliance is running.

u

Do not put the appliance down until the

cutting line has come to a complete

standstill.

u

Use only the appropriate type of cut-

ting line. Never use metal cutting line

or shing line.

u

Be careful not to touch the line trim-

ming blade.

u

Take care to keep the mains cable

away from the cutting line. Always be

aware of the position of the cable.

u

Keep hands and feet away from the

cutting line at all times, especially

when switching on the motor.

u

Before using the appliance and after

any impact, check for signs of wear or

damage and repair as necessary.

u

Never operate the appliance with

damaged guards or without guards in

place.

u

Take care against injury from any de-

vice tted for trimming the lament line

length. After extending new cutter line

always return the machine to its nor-

mal operating position before switching

on.

u

Always ensure that the ventilation slots

are kept clear of debris.

u

Do not use the lawn trimmer (edge

trimmer), if the cords are damaged or

worn.

u

Keep extension cords away from cut-

ting elements.

Electrical safety

#

This appliance is double insu-

lated; therefore no earth wire is

required. Always check that the

power supply corresponds to the

voltage on the rating plate.

u

If the supply cord is damaged, it must

be replaced by the manufacturer or

an authorised Black & Decker Service

Centre in order to avoid a hazard.

u

Electric safety can be further improved

by using a highsensitivity 30 mA Re-

sidual Current Device (RCD).

Labels on appliance

The following warning symbols are found on the appliance:

Read the manual prior to operation.

Wear safety glasses or goggles when operating

this appliance.

1 2 3 4 5 6 7 8 9 10 11 12 ... 99 100

Commentaires sur ces manuels

Pas de commentaire