Black & Decker FX1200 Spécifications télécharger pdf (Page 199)

199199

199

Phone: +49 931 49794- 0 Fax: -29

Hotline: +49 5251 688865-99Hotline: +49 5251 688865-99

Hotline: +49 5251 688865-99

Users Manual grandMA Version 3.0

14.5.714.5.7

14.5.7 Setting up a Playback Connection

If during a Playback connection the Master console executes Playback commands, the slave console will do the same

executor button- or fader movements as the master. The active Executors will only be displayed on the currently active page

of the Slave console (but will be executed on all other pages). Using GO commands, not only GO+ and GO- are called up, but

also GOTO CUE X (Number of the Cue). All Playback commands (FIX, SELECT, OFF, TEMP, TOP, ON, <<<, LEARN, >>>, GO-,

Pause and GO) will be executed. The switching over of pages will

notnot

not be executed on the Slave console. If on the Master

console, executors are assigned via the ASSIGN menu, this will also happen on the Slave console.

This window will open if you go to Playback and press the CONNECT button.

By pressing the MASTER button, this console will be started as Master and the other one as Slave. By pressing the

SLAVE button, this console will be started as Slave and the other one as Master.

After you have made your choice for either MASTER or SLAVE, this window will open where you can now select the

console to be connected.

As soon as you have selected the console, the connection will be set up and can be used.

As soon as the connection has been fully set up, you can start with the normal operation of the Master

console. The Slave console will simultaneously do all the executor movements (even fader movements).

The Playback Connection remains active as long as it is not:The Playback Connection remains active as long as it is not:

The Playback Connection remains active as long as it is not:

 manually interrupted by taking off the EtherNet cable (or by deactivation of the EtherNet Hubs).

 automatically stopped due to a recognised communication problem.

 canceled due to a hardware problem at either the Master or the slave console.

If the connection is interrupted, the NETWORK ERROR window will open. The given time (Timeout for

Connection), in which the connection can be verified, will run. After this time has elapsed, the connection

will be terminated automatically. By pressing the Terminate Connection button, the connection can be

terminated immediately.

While the connection is interrupted, you can work with both consoles in the normal way.

Disconnecting a Playback ConnectionDisconnecting a Playback Connection

Disconnecting a Playback Connection

If you go to Playback in the PROTOCOL-CONFIGURATION menu and press the DISCONNECT button, a window

will open, where you can terminate the connection by clicking on the other console. Both consoles will switch

to Solo mode and can be used again the normal way.

Using consoles in external networksUsing consoles in external networks

Using consoles in external networks

Do not try to connect Playback systems of grandMA consoles with other computers such as office PCs or

network printers, as this would slow down the connection and the Playback might lose the synchronisation.

True Tracking and Playback simultaneouslyTrue Tracking and Playback simultaneously

True Tracking and Playback simultaneously

To make a True Tracking Backup of a Playback connection, you have to set up the Playback connection to the

Master console first. After that you can install the True Tracking Backup connection from the Master resp.

from the Slave Playback consoles to the corresponding True Tracking Backup Slaves..

We recommend you to get more informtions by the MA Hotline before construction of complex networks

(see below).

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 205

Commentaires sur ces manuels

Pas de commentaire

Black & Decker FX1200 Spécifications Page 199

Commentaires sur ces manuels

Produits connexes et manuels pour Transformateurs de denrées alimentaires Black & Decker FX1200