Black & Decker FX1200 Spécifications télécharger pdf (Page 196)

196196

196

MA Lighting Technology GmbH

Dachdeckerstr. 16

D-97297 Waldbüttelbrunn

www.malighting.de eMail: [email protected]

14 True Tracking Backup and Playback on grandMA consoles

14.5.314.5.3

14.5.3

Configuring Master/Slave-Mode for True Tracking or PlaybackConfiguring Master/Slave-Mode for True Tracking or Playback

Configuring Master/Slave-Mode for True Tracking or Playback

By pressing the button Remote Network Configuration in the TOOLS Menu, the following menu will open.

1 The chart shows all grandMA consoles with names and IP-Addresses, that are available in this network. The column

UNIV provides information for each console, if there are 4 or 8 DMX-outputs available on the respective console.

The TTB-Status column indicates the mode (Solo, Master or Slave) of True Tracking Backup, which the console is

currently using. If you find an asterix in front of the indication, the console can be addressed as either Master or

Slave. If there is no asterix, this console is locked. (Unlock; see item 2 - Button ALLOW/REJECT REMOTE LOGIN).

The PB-Status column indicates the mode (Solo, Master or Slave) of Playback operation, which the console is

currently using. If you find an asterix in front of the indication, the console can be addressed as Master or Slave. If

there is no asterix, the console is locked (Unlock; see item 4 - Button ALLOW/REJECT REMOTE LOGIN).

True Tracking SetupTrue Tracking Setup

True Tracking Setup

2 On the right side of Status indicates, if this console operates in a True Tracking Backup connection as the Master or

the Slave. If SOLO is indicated, the console is working in Stand-Alone mode.

You can either set up or cancel a MASTER-SLAVE connection using the CONNECT/DISCONNECT button. See next

page.

Switching the button function by shortly pressing on it:Switching the button function by shortly pressing on it:

Switching the button function by shortly pressing on it:

ALLOW REMOTE LOGIN: This console can be used by another console for a True Tracking Backup connection.

REJECT REMOTE LOGIN: This console can

notnot

not be used by another console for a True Tracking Backup connection.

3 In a True Tracking Backup connection this chart will show the two connected consoles.

4 In the cell on the right side of Timeout for Connection: you find a time indication, after which the consoles will be

switched to Stand-Alone mode, in case the connection between Master and Slave is lost. By clicking into the cell,

you can enter a different time or None.

If an error in the network or on one of the consoles is detected, the NETWORK ERROR window will open (from now

on, the given time starts to run).

By pressing the ESCAPE key on the keyboard, you can switch this console to Stand-Alone mode and work with it

immediately.

After the given time has elapsed, the console switches to Stand-Alone mode that still has to be confirmed by

pressing the OK button. By changing the time to 0, you can switch to Stand-Alone mode much faster.

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 204 205

Pas de commentaire

Black & Decker FX1200 Spécifications Page 196