Black & Decker FX1000 Manuel d'utilisateur Page 12

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 44
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 11
English
-12-
Note: Care must be taken when handling
the sharp cutting blades, emptying the
bowl and during cleaning.
Note: Always handle the chopping blade
(15) by its central plastic part.
Note: When kneading dough, do not
operate the machine longer than 20
seconds. Wait at least 2 minutes before
operating the machine again.
Note: When whisking, use maximum
speed.
Citrus Juicer Attachment (Fig E)
Fit the processor bowl (11) onto the
main unit (3) & assemble the citrus
juicer.
Cut the fruit in half.
Connect the appliance to a suitable
electrical supply.
Rotate the speed control (5) to the
minimum setting.
Gently press the cut face of the fruit
onto the reamer (32).
When juicing is completed, turn off the
appliance & wait until all parts come to a
complete stop.
Remove the reamer & filter.
Remove the bowl (11) & pour the juice
into a suitable container.
Note: The citrus juicer should only be
operated at minimum speed.
Centrifugal Juicer Attachment (Fig F)
Fit the processor bowl (11) onto the
main unit (3) & assemble the centrifugal
juicer.
Connect the appliance to a suitable
electrical supply.
Rotate the speed control (5) a medium
setting for soft fruits & the maximum
setting for hard fruits.
Insert the ingredient into the hole in the
lid. The pusher (36) can be used to guide
the ingredients onto the filter.
If the juice extractor becomes clogged
during use, turn the processor off and
remove the pulp using the spatula.
Note: Always use the pusher (36) to guide
the ingredients.
Note: Never insert fingers in to the hole in
the lid.
Note: Do not use the appliance if the
rotating sieve is damaged.
Shredding, Slicing, Grating & Chipping
Blade Attachment (Fig D)
Assemble the required blade & fit the
bowl & assembled blade carrier to the
appliance.
• Fit the lid.
Connect the appliance to a suitable
electrical supply
Rotate the speed control (5) to the
maximum setting.
Using the pusher (36), press the
ingredients down towards the blade.
Note: Always use the pusher (36) to guide
the ingredients.
Note: Never insert fingers in to the hole in
the lid.
Note: Do not over-fill the bowl
Note: Care must be taken when handling
the sharp cutting blades, emptying the bowl
and during cleaning.
Vue de la page 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Commentaires sur ces manuels

Pas de commentaire