Black & Decker BDEDMT Manuel d'instructions télécharger pdf (Page 52)

OPERATING INSTRUCTIONS

WARNING: Shock hazard. Under no circumstances should this product be used near water.

WARNING: Risk of lacerations or burns. Do not touch work piece or accessory

immediately after operating the tool. They can become very hot. Handle carefully. Always allow

accessories and work piece to cool before handling.

WARNING: To reduce the risk of injury, turn off and remove battery from tool or disconnect

plug from power source before making any adjustments or removing or installing attachments or

accessories. Remove any accessory from the attachment before removing or installing the attachment.

NOTE: Refer to Power Unit instruction manual before operating this tool for all safety warnings

and details on installing and removing attachments.

OPERATION

• Toswitchthetoolon,pressthevariablespeedswitchonthepowerunit.Thetoolspeed

depends on how far you press the switch.

• Toswitchthetooloff,releasethevariablespeedswitch.

QUICK RELEASE CHUCK - FIGURE A

WARNING: Make certain to turn off and remove

battery from tool or disconnect plug from power source

before installing or removing accessories

NOTE: Only use 2 inch (50mm) length, 1/4 inch (6.35

mm) hex accessories with a retaining groove to ensure

the impact driver functions properly.

To install an accessory, pull the chuck collar (2) away from

the front of the tool, insert the accessory, and release the

collar. The accessory is locked in place.

To remove an accessory, pull the chuck collar (2) away from the front of the tool, remove the

accessory and release the collar.

TROUBLESHOOTING

Problem Possible Cause Possible Solution

•Unitwillnotstart.  •Attachmentisnotsecured.  •Makecertaintheattachmentisfully

pushed into the Power Unit.

For assistance with your product, visit our website www.blackanddecker.com for the location

of the service center nearest you or call the BLACK & DECKER help line at 1-800-544-6986.

NOTE: Refer to Power Unit instruction manual for troubleshooting solutions regarding opera-

tion of the Power Unit.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool;

never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and

adjustment (other than those listed in this manual) should be performed by authorized service

centers or other qualified service personnel, always using identical replacement parts.

ACCESSORIES

WARNING: The use of any accessory not recommended for use with this tool could be hazardous.

Recommended accessories for use with your tool are available from your local dealer or authorized

service center. If you need assistance regarding accessories, please call: 1-800-544-6986.

This device complies with part 15 of the FCC rules. Operation is subject to the following two

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Black & Decker BDEDMT Manuel d'instructions Page 52

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker BDEDMT