Black & Decker BDEDMT Manuel d'instructions télécharger pdf (Page 50)

WARNING:

Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

WARNING: Read all safety warnings and all instructions provided with

your Power Unit (BDCDMT112, BDCDMT120, or BDEDMT) before using

this attachment. Failure to follow the warnings and instructions may result in

electric shock, re and/or serious injury.

SPECIFIC SAFETY RULES

• Hold power tool by insulated gripping surfaces, when performing an operation where the cutting

accessory may contact hidden wiring or its own cord. Fastener contacting a “live” wire may make

exposed metal parts of the power tool “live” and could give the operator an electric shock.

• Wear ear protectors with impact drivers. Exposure to noise can cause hearing loss.

• Use clamps or another practical way to secure and support the work piece to a stable platform.

Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

• When not in use, place tool on its side on a stable surface where it will not cause a tripping or

falling hazard. Some tools with large battery packs will stand upright but may be easily knocked over.

• Keep your hair, clothing, and gloves away from air vents. Air vents often cover moving

parts in which these items can be caught.

• Hold tool rmly with two hands. Loss of control can cause personal injury.

• Wear safety goggles or other eye protection. Hammering and drilling operations cause

chips to y. Flying particles can cause permanent eye damage.

• Bits, sockets and tools get hot during operation. Wear gloves when touching them.

• Do not operate this tool for long periods of time. Vibration caused by tool action may be

harmful to your hands and arms. Use gloves to provide extra cushion and limit

exposure by taking frequent rest periods.

• Wear appropriate personal hearing protection during use. Under some conditions and

duration of use, noise from this product may contribute to hearing loss.

WARNING: Impact wrenches are not torque wrenches. Do not use this tool for

tightening fasteners to specied torques. An independent, calibrated torque measurement

device such as a torque wrench should be used when under tightened or over tightened

fasteners can lead to the failure of the joint.

WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also

use face or dust mask if drilling operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:

•

ANSI Z87.1 eye protection (CAN/CPA Z94.3),

•

ANSI S12.6 (S3.19) hearing protection,

•

NOSH/OSHA respiratory protection.

WARNING: Always wear proper personal hearing protection that conforms to

ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise from this

product may contribute to hearing loss.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to the state of California to cause cancer,

birth defects or other reproductive harm. Some examples of these chemicals are:

•

lead from lead-based paints,

 •

crystalline silica from bricks and cement and other masonry products, and

•

arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well ventilated area, and work with approved safety

equipment, such as those dust masks that are specially designed to lter out microscopic particles.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Black & Decker BDEDMT Manuel d'instructions Page 50

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker BDEDMT