Black & Decker LH1600 Manuel d'instructions télécharger pdf (Page 10)

on wet or slippery surfaces, or during snow storms, ra

storms, or other adverse weather conditions.

• Keep the handles dry, clean, and free of oil or grease.

• Do not allow dirt, debris, or sawdust to build up on the mo

or outside air vents

SAVE THESE INSTRUCTIONS

Preparing Your Chain Saw for Use

Chain oiling

• Chain oiling is recommended whenever you use a new chain

the first time. Take the new chain and soak it in chain oil for

least an hour before using it.

• Oiling during use is automatic and is not adjustable.

• We recommend that you use only one brand of oil during t

lifetime of your chain saw because mixtures of different o

could lead to the oil becoming degraded, which can drastica

shorten the lifetime of the saw chain.

• Never use waste oil, thick oil or very thin sewing machine

These may damage your chain saw.

Assembly of guide bar and chain (Fig. C)

Warning: Always unplug the saw from the power sour

before installing a bar and/or a chain.

Caution: Always wear protective gloves when working on

your chain saw. The chain is sharp and can cut you when it

not running.

• (Fig. C1) Fit the saw chain (1) over the guide bar (2), mak

sure that the cutters are facing the right way and that the slid

tensioner (16) is facing towards you.

• (Fig. C2) Remove the chain tensioner knob (4) and the cov

screw located just below it. With your chain saw horizontal on

ENGLISH

If you have any questions, call 1-800-54-HOW-TO

been demonstrated to significantly reduce the number and

seriousness of kickbacks when tested in accordance with

safety requirements for electric chain saws.

• Low-Kickback Chain, designed with a contoured depth

gauge and guard link which deflect kickback force and allow

wood to gradually ride into the cutter. A low-kickback chain is

a chain which has met kickback performance requirements

of ANSI B175.1-1991.

• Hand guard, designed to reduce the chance of your left

hand contacting the chain if your hand slips off the front

handlebar.

• Position of front and rear handlebars, designed with

distance between handles which provides better control,

balance, and resistance if kickback occurs.

Additional Safety Rules: Chain Saws

CAUTION: Some wood contains preservatives such as

copper chromium arsenate (CCA) which can be toxic. When

cutting these materials extra care should be taken to avoid

inhalation and minimize skin contact.

WARNING: Use of this tool can generate dust containing

chemicals known to cause cancer, birth defects or other

reproductive harm. Use appropriate respiratory protection.

• Do not operate chain saw that is damaged, improperly

adjusted, or not completely and securely assembled. Be sure

that the saw chain stops moving when the trigger is released.

• Do not attempt operations beyond your capacity or

experience.

• Do not operate a chain saw with one hand! Serious injury to

the operator, helpers, or bystanders may result from one-

handed operation. A chain saw is intended for two-handed

use only.

• To reduce potential for electric shock, do not operate the saw

chainsaw booklet 1/19/00 1:45 PM Page 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Black & Decker LH1600 Manuel d'instructions Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à chaîne Black & Decker LH1600