Black & Decker Trimmer NHT518 Manuel d'utilisateur télécharger pdf (Page 11)

TROUBLESHOOTING

Problem Possible Cause Possible Solution

• Slow running, noisy or hot blades. • Dry, corroded blades. • Lubricate blades.

• Blades or blade support bent. • Straighten blade or blade support.

• Bent or damaged teeth. • Straighten teeth.

• Loose blade bolts. • Tighten blade bolts.

• Unit will not start. • Battery not installed properly. • Check battery installation.

• Battery not charged. • Check battery charging requirements.

• Lock off not fully operated. • Check that lock off is fully forward prior to

moving main trigger.

• Battery wonʼt charge. • Battery not inserted into charger. •InsertbatteryintochargeruntilgreenLED appears.

• Charger not plugged in. • Plug charger into a working outlet. Refer to

“Important Charging Notes” for more details.

• Check current at receptacle by plugging in a

lamp or other appliance.

• Check to see if receptacle is connected to a

light switch which turns power off when you turn

out the lights.

• Surrounding air temperature too hot or too cold. • Move charger and tool to a surrounding air

temperature of above 40 degree F (4.5°C) or

below 105 degree F (+40.5°C).

For assistance, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK &

DECKER help line at 1-800-544-6986.

See ‘Tools-Electric’

– Yellow Pages –

for Service & Sales

Imported by

Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286 U.S.A.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Pas de commentaire

Black & Decker Trimmer NHT518 Manuel d'utilisateur Page 11