Black & Decker 90504614 Manuel d'instructions télécharger pdf (Page 9)

Drilling in Metal

Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which

should be drilled dry. The cutting lubricants that work best are sulfurized cutting oil or lard

oil.

Drilling in Masonry

Use carbide tipped masonry bits. Refer to Drilling section. Keep even force on the drill but

not so much that you crack the brittle material. A smooth, even flow of dust indicates the

proper drilling rate.

Troubleshooting

oblem Possible Cause Possible Solution

• Unit will not start. • Battery not charged. • Check battery charging

requirements.

• Battery will not charge. • Charger not plugged in. • Plug charger into a

working outlet. Refer to

“Important Charging

Notes” for more details.

• Check current at

receptacle by plugging

in a lamp or other

appliance.

• Check to see if

receptacle is connected

to a light switch which

turns power off when

you turn out the lights.

• Surrounding air temperature • Move charger and

too hot or too cold. tool to a surrounding

air temperature of

above 40 degrees F

(4,5°C) or below

105 degreesF (+40,5°C)

For assistance with your product, visit our website www.blackanddecker.com for the

location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the

tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and

adjustment (other than those listed in this manual) should be performed by authorized

service centers or other qualified service organizations, always using identical

replacement parts.

THE RBRC™ SEAL

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the

lithium-ion battery (or battery pack) indicates that the costs to recycle the

battery (or battery pack) at the end of its useful life have already been paid

by Black & Decker. In some areas, it is illegal to place spent lithium-ion

batteries in the trash or municipal solid waste stream and the RBRC

program provides an environmentally conscious alternative.

RBRC in cooperation with Black & Decker and other battery users, has established

programs in the United States and Canada to facilitate the collection of spent lithium-ion

batteries. Help protect our environment and conserve natural resources by

returning the entire tool to an authorized Black & Decker service center for

recycling. You may also contact your local recycling center for information, or call

1-800-8-BATTERY.

90504614 SC1400 Lith Ion drill 6/19/06 9:49 AM Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 33 34

Commentaires sur ces manuels

Pas de commentaire

Black & Decker 90504614 Manuel d'instructions Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Perceuses électriques Black & Decker 90504614