Black & Decker RC865 Manuel d'instructions télécharger pdf (Page 49)

Advanced Operations

En-49

Operating

procedure

(➔ page 44)

DTS

■ Neo:6 Music

Center Image

` 0 to 2

to 5

With this setting, you can specify by how much the

front left and right channel output is attenuated in

order to create the center channel.

Changing the value from “0” to “5” will spread the

sound of the center channel to left and right

(outwards).

Theater-Dimensional

■ Listening Angle

` Wide

Select if the listening angle is greater than 30

degrees.

` Narrow:

Select if the listening angle is less than 30

degrees.

With this setting, you can optimize the Theater-

Dimensional listening mode by specifying the angle of

the front left and right speakers relative to the

listening position. Ideally, the front left and right

speakers should be equidistant from the listening

position and at an angle close to one of the two

available settings.

Note

• For best results, we recommend setting “

Narrow” to 20°

and “Wide” to 40°.

Items can be set individually for each input selector.

Press the input selector buttons to select an input

source.

Audyssey

The tone for each speaker is set automatically by

Audyssey MultEQ

Room Correction and Speaker

Setup. To enable the following settings, you must first

perform the Room Correction and Speaker Setup

(➔ page 21).

• These technologies cannot be used when a pair of

headphones is connected.

■ Audyssey

` Off

` Movie:

Select this setting for movie material.

The Audyssey indicator will light.

` Music:

Select this setting for music material.

The Audyssey indicator will light.

Note

• When “Audyssey Quick Start” has been used for

measurement, “Audyssey” cannot be selected.

• Audyssey equalizing does not work with DSD sources.

■ Dynamic EQ

` Off

` On:

Audyssey Dynamic EQ

becomes active.

The Dynamic EQ indicator will light.

With Audyssey Dynamic EQ, you can enjoy great

sound even when listening at low volume levels.

Audyssey Dynamic EQ solves the problem of

deteriorating sound quality as volume is decreased by

taking into account human perception and room

acoustics. It does so by selecting the correct

frequency response and surround volume levels

moment-by-moment so that the content sounds the

way it was created at any volume level — not just at

reference level.

■ Reference Level

Audyssey Dynamic EQ Reference Level Offset

` 0dB:

This should be selected for movie contents.

` 5dB :

Select this setting for content that has a very

wide dynamic range, such as classical music.

` 10 dB:

Select this setting for jazz or other music that

has a wider dynamic range. This setting should

also be selected for TV content as that is usually

mixed at 10 dB below film reference.

` 15 dB:

Select this setting for pop/rock music or other

program material that is mixed at very high

listening levels and has a compressed dynamic

range.

Movies are mixed in rooms calibrated for film

reference. To achieve the same reference level in a

home theater system each speaker level must be

adjusted so that –30 dBFS band-limited (500 Hz to

2000 Hz) pink noise produces 75 dB sound pressure

level at the listening position. A home theater system

automatically calibrated by Audyssey MultEQ will play

Front left speaker Front right speaker

Listening angle: 30°

8. Source Setup

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 119 120

Commentaires sur ces manuels

Pas de commentaire

Black & Decker RC865 Manuel d'instructions Page 49

Commentaires sur ces manuels