Black & Decker RC865 Manuel d'instructions télécharger pdf (Page 47)

Advanced Operations

En-47

Operating

procedure

(➔ page 44)

■ Front

` Small

` Large:

Select based on the cone diameter.

Note

• If the “Subwoofer” setting is set to “No”, this setting is fixed

to “Large”.

■ Center

, Surround

` Small:

` Large:

Select based on the cone diameter.

` None

Note

If the “Front” setting is set to “Small”, the “Large” option

cannot be selected.

■ Crossover (Crossover Frequency)

This setting is advantageous for the speakers that

you specified as “Small” in

“4. Sp Config (Speaker

Configuration)” (➔ page 46)

. To get the best bass

performance from your speaker system, you need

to set the crossover frequency according to the size

and frequency response of your speakers.

` 40Hz, 50Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz,

120Hz, 150Hz, 200Hz

Use the diameter of the smallest speaker in your

system when choosing the crossover frequency.

Choose the setting matching your speaker.

Note

• For a more accurate setting, look up the frequency

response in the manuals supplied with your speakers and

set accordingly.

• Choose a higher crossover frequency if you want more

sound from your subwoofer.

■ Double Bass

` On

` Off

Turn this setting on to boost bass output by feeding

bass sounds from the front left, right, and center

channels to the subwoofer.

Note

• When the “Subwoofer” setting is set to “No” or the “Front”

setting to “Small”, this setting is fixed to “Off” (➔ page 46).

• This setting is set to “On” automatically when the

“Subwoofer” and “Front” settings are set for the first time

to “Yes” and “Large” respectively.

Here you can specify the distance from each speaker

to the listening position so that the sound from each

speaker arrives at the listener’s ears as the sound

designer intended.

Note

• These settings are not available in either of the following

cases:

– A pair of headphones is connected.

–The “Audio TV Out” setting is set to “On” (➔ page 53).

–“HDMI CEC (RIHD)” is set to “On” (➔ page 52) and

you’re listening through your TV speakers.

■ Unit

` feet:

Distances can be set in feet. Range: 1ft to 30ft

in 1 foot steps.

` meters:

Distances can be set in meters. Range: 0.3m to

9.0m in 0.3 meter steps.

(The default setting varies from country to country.)

■ Left, Center, Right, Surround Right, Surround

Left, Subwoofer

` Specify the distance from each speaker to your

listening position.

Note

• Speakers that you set to “No” or “None” in the “4. Sp Config

(Speaker Configuration)” (➔ page 46) cannot be selected.

Speaker cone diameter Crossover frequency

Over 8 in. (20 cm)

40/50/60 Hz

6-1/2 to 8 in. (16 to 20 cm)

70/80/90 Hz

5-1/4 to 6-1/2 in. (13 to 16 cm) 100 Hz

3-1/2 to 5-1/4 in. (9 to 13 cm) 120 Hz

Under 3-1/2 in. (9 cm)

150/200 Hz

This setting is NOT set automatically by

Audyssey MultEQ

Room Correction and Speaker

Setup function (➔ page 21).

5. Sp Distance (Speaker Distance)

This setting is set automatically by

Audyssey MultEQ Room Correction and Speaker

Setup function (➔ page 21).

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 119 120

Commentaires sur ces manuels

Pas de commentaire

Black & Decker RC865 Manuel d'instructions Page 47

Commentaires sur ces manuels