Black & Decker Fire Storm FS6500HD Manuel d'instructions télécharger pdf (Page 6)

Safety Warnings and Instructions: Drills

WARNING: Shock hazard. When drilling or driving into walls, floors or wherever

live electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF

THE TOOL! Hold the tool only by the plastic handle(s) to prevent shock.

• Do not lock the tool ON when drilling by hand. Refer to Operating Instructions-Switch.

• Hold drill firmly with both hands to control the twisting action of the drill. If your drill

is equipped with a side handle, always use the side handle.

• WARNING: Drill may stall (if overloaded or improperly used) causing a twist. Always

expect the stall. Grip the drill firmly to control the twisting action and prevent loss of control

which could cause personal injury. If a stall does occur, release the trigger immediately

and determine the reason for the stall before re-starting.

• Always unplug the drill when attaching or removing accessories. When attaching

accessories in the drill chuck, it is important to securely tighten the chuck using all three

holes to prevent slippage. When using a keyless chuck, hand tighten firmly.

Motor

Be sure your power supply agrees with nameplate marking. 120 Volts AC only means your

drill will operate on standard 60 Hz household power. Do not operate AC tools on DC. A

rating of 120 volts AC/DC means that your tool will operate on standard 60 Hz AC or DC

power. This information is printed on the nameplate. Lower voltage will cause loss of power

and can result in over-heating. All Black & Decker tools are factory-tested; if this tool does

not operate, check the power supply.

635040-03 FS drills 4/25/06 1:56 PM Page 6

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Pas de commentaire

Black & Decker Fire Storm FS6500HD Manuel d'instructions Page 6