Black & Decker Fire Storm FS6500HD Manuel d'instructions télécharger pdf (Page 3)

b) Do not use the power tool if the switch does not turn it on and off.

Any power

tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools.

Such preventive safety measures reduce the risk of starting the power

tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tools

operation. If damaged, have the power tool repaired before use.

Many accidents

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in accordance with these

instructions and in the manner intended for the particular type of power tool,

taking into account the working conditions and the work to be performed.

Use

of the power tool for operations different from those intended could result in a

hazardous situation.

5) Service

a) Have your power tool serviced by a qualified repair person using only identical

replacement parts.

This will ensure that the safety of the power tool is maintained.

SPECIFIC SAFETY RULES

a) Hold tool by insulated gripping surfaces when performing an operation where

the cutting tool may contact hidden wiring or its own cord.

Contact with a "live"

wire will make exposed metal parts of the tool "live" and shock the operator.

b) Use clamps or another practical way to secure and support the work piece to

a stable platform.

Holding the work by hand or against your body leaves it

unstable and may lead to loss of control.

c) Wear ear protectors with impact drills.

Exposure to noise can cause hearing

loss.

d) Use auxiliary handles supplied with the tool.

Loss of control can cause personal

injury.

e) Hammer bits and tools get hot during operation.

Wear gloves when touching

them.

WARNING: ALWAYS use safety glasses. Everyday eye glasses are NOT safety

glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS WEAR

CERTIFIED SAFETY EQUIPMENT:

•

ANSI Z87.1 eye protection (CAN/CSA Z94.3)

•

ANSI S12.6 (S3.19) hearing protection

•

NIOSH/OSHA/MSHA respiratory protection

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and

other construction activities contains chemicals known to cause cancer, birth

defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber (CCA).

Your risk from these exposures varies, depending on how often you do this type of

work. To reduce your exposure to these chemicals: work in a well ventilated area, and

work with approved safety equipment, such as those dust masks that are specially

designed to filter out microscopic particles.

• Avoid prolonged contact with dust from power sanding, sawing, grinding,

drilling, and other construction activities. Wear protective clothing and wash

exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or

lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disperse dust, which may cause

serious and permanent respiratory or other injury. Always use NIOSH/OSHA

approved respiratory protection appropriate for the dust exposure. Direct particles

away from face and body.

635040-03 FS drills 4/25/06 1:56 PM Page 3

1 2 3 4 5 6 7 8 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Black & Decker Fire Storm FS6500HD Manuel d'instructions Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker Fire Storm FS6500HD