Black & Decker HP126F2K Manuel d'instructions télécharger pdf (Page 4)

times. Never carry saw by the cord or pull it to disconnect from

receptacle. Keep cord from oil and sharp edges. Inspect extension

cords periodically and replace if damaged. Keep tools sharp and

clean for better and safer performance. Follow instructions for

lubricating and changing accessories. Keep handles dry, clean, and

free from oil and grease.

5. Service

a. Have your power tool serviced by a qualified repair person

using only identical replacement parts. This will ensure that the

safety of the power tool is maintained.

b. If the replacement of the supply cord is necessary, this has to

be done by the manufacturer or his agent in order to avoid a safety

hazard.

Additional safety instructions for the

Alligator

Lopper

WARNING: Never use the tool above shoulder height. Always

position yourself out of the path of falling branches and debris.

WARNING: Do not use this tool to fell trees.

- Pre-plan a safe exit from falling branches and debris. Ensure the

exit route is clear of obstacles that would prevent or hinder

movement. Remember wet grass and freshly cut bark is slippery.

- Be aware of the direction that a branch may fall. Consider all

conditions that may affect the direction of fall, including:

- The intended direction of fall.

- The natural lean of the branch.

- Any unusual heavy limb structure or decay.

- Surrounding trees and obstacles including overhead lines.

- The wind speed and direction.

- The safe distance between a branch and debris to be felled and

bystanders, buildings and other objects is at least 2 1/2 times the

length of the branch. Any bystander, building or object within this

distance is at risk from being struck by the falling branch.

- When cutting a limb that is under tension be aware of spring back.

When the tension in the wood fibres are released the spring loaded

limb may strike the operator and/or throw the tool out of control.

- Always wear suitable safety equipment such as non-skid

heavy-duty shoes, goggles, ear protection and gloves when

operating the tool.

- Ensure someone is nearby (at a safe distance) in case of an

accident.

- Do not attempt to operate the tool when in a tree, on a ladder or

standing on any other unstable support.

- Keep proper footing and balance at all times.

- Hold the tool firmly with both hands when the motor is running.

- Keep handles dry, clean and free from oil and grease. Greasy oily

handles are slippery causing loss of control.

- Do not let the moving chain contact any object at the tip of the

guide bar.

- Keep your saw chain properly tensioned. Check tension at regular

intervals with the motor stopped and cord disconnected.

- Begin and continue cutting only with the chain moving at full

speed.

- Watch for shifting branches or other forces that could close a cut

and pinch or fall into the chain.

- Use extreme caution when re-entering a previous cut. Engage

spikes on lower jaw into wood and allow the chain to reach full

speed before proceeding with cut.

- Use of this tool for operation different to those intended could

result in hazardous situations. Cut wood only. Don't use this tool for

purposes not intended - for example - Don't use tool for cutting

plastic, masonry or non-wood building materials.

- If any debris gets caught with the guard or tool discontinue use,

disconnect power cord and clear debris.

479970-00 LP1000 9/14/05 1:00 PM Page 4

1 2 3 4 5 6 7 8 9 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Black & Decker HP126F2K Manuel d'instructions Page 4

Commentaires sur ces manuels