Black & Decker HP126F2K Manuel d'instructions télécharger pdf (Page 3)

your hair, clothing and gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and

properly used. Use of these devices can reduce dust related

hazards.

h. Maintain Appliance With Care - Keep cutting edge sharp and

clean for best performance and to reduce the risk of injury.

Follow instructions for lubricating and changing accessories. Inspect

appliance cord periodically, and if damaged, have it repaired by an

authorized service facility. Inspect extension cords periodically and

replace if damaged. Keep handles dry, clean, and free from oil and

grease.

i. Grip Saw Firmly - Hold the chain saw firmly with both hands

when the motor is running. Use a firm grip with thumbs and

fingers encircling the chain saw handles.

j. Power Supply - Connect chain saw to correct voltage, that is,

be sure that the voltage supplied is the same as that specified

on the nameplate of the tool.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better and

safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on

and off. Any power tool that cannot be controlled with the switch is

dangerous and must be repaired.

c. Disconnect the plug from the power source when not in use,

before servicing, before making any adjustments, changing

accessories and attachments such as saw chain and guard or

storing power tools. Such preventive safety measures reduce the

risk of starting the power tool accidentally.

d. When not in use, appliances should be stored indoors in a

dry, and high or locked-up place, out of the reach of children

and do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e. Check Damaged Parts - Before further use of the appliance, a

guard or other part that is damaged should be carefully

checked to determine that it will operate properly and perform

its intended function. Check for alignment of moving parts, binding

of moving parts, breakage of parts, mounting, and any other

condition that may affect its operation. A guard or other part that is

damaged should be properly repaired or replaced by an authorized

service center unless indicated elsewhere in this manual.

f. Keep cutting tools sharp and clean. Properly maintained cutting

tools with sharp cutting edges are less likely to bind and are easier

to control.

g. Use the power tool, accessories and tool bits etc., in

accordance with these instructions and in the manner intended

for the particular type of power tool, taking into account the

working conditions and the work to be performed. Use of the

power tool for operations different from those intended could result

in a hazardous situation.

h. Do not operate a chain saw that is damaged, improperly

adjusted, or is not completely and securely assembled. Be sure that

the saw chain stops moving when the trigger is released.

i. Use extreme caution when cutting small size brush and

saplings because the slender material may catch the saw chain

and be whipped toward you or pull you off balance.

j. Carry the chain saw by the front handle with the saw stopped,

finger off the switch, the guide bar and saw chain to the rear.

k. Maintain Chain Saw With Care - Inspect chain saw cords

periodically and if damaged, have repaired by authorized

service facility. Keep cord clear of the chain and operator at all

479970-00 LP1000 9/14/05 1:00 PM Page 3

1 2 3 4 5 6 7 8 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Black & Decker HP126F2K Manuel d'instructions Page 3

Commentaires sur ces manuels