Assembly
Attaching Accessories - Fig. A
• Fit the appropriate accessory (7 & 8) on the short
end of the exible hose (9).
• Make sure the accessory is fully attached.
• Fit the long end of the exible hose into the
nozzle (4).
• Make sure the exible hose is fully in.
Operation
Connecting to the Vehicle’s Power Supply
• Make sure the auto vac is switched off.
• Remove the cigarette lighter from its socket, if present.
• Plug the 12V car connector (6) into your car’s cigarette lighter socket or power source.
Switching On and Off - Fig. B
• To switch the appliance on, slide the on/off switch
(1) forward to position 1.
• To switch the appliance off, slide the on/off switch
back to position 0.
Emptying and Cleaning
WARNING: Projectile/Respiratory Hazard:
Never use the auto vac without its filter.
WARNING: The lters are re-usable and should be cleaned regularly. Optimum
dust collection will only be achieved with clean lters.
NOTICE: The filter is re-usable, do not throw it away when the product is emptied.
NOTICE: In order to keep the suction force optimized, the lters must be cleaned
regularly during use.
• There are two methods of cleaning the bowl, a quick empty method and a thorough
clean method.
Emptying the Dust Bowl - Fig C
• Press the nozzle release buttons (5) and pull the
nozzle (4) straight off.
• Empty the contents of the bowl.
• To replace the nozzle, place it back onto the auto
vac until it “clicks” rmly into position.
4
A
B
C
Commentaires sur ces manuels