Black & Decker BDH1220AV Manuel d'utilisateur télécharger pdf (Page 5)

Removing Dust Bowl and Filters

NOTICE:

Maximum dust collection will only be

obtained with a clean filter and an empty dust bowl.

NOTICE: Empty dust bowl before it becomes

overfilled. If dust begins to fall back out of the

product after it is switched off, it is too full and

requires emptying.

• Press the bowl release button (2) and pull the

dust bowl (3) away from the body of the auto vac.

• While holding the dust bowl over a bin, pull the lter

out to empty the contents of the bowl.

NOTICE: The auto vac has a pre-filter and an

inner filter. The filters should be separated to allow

better cleaning.

• To separate the filters, twist the pre-lter (10) in

a clockwise direction and lift away from the inner

lter (11) as shown in Figure E.

• Shake or lightly brush any loose dust off both filters.

• To replace the filters, slide the pre-filter over the

inner filter.

• Align the wings of the pre-filter with the slots in the

inner filter and twist in a counterclockwise direction

as shown in Figure F.

• Place filters back into the bowl pressing firmly to

ensure a secure fit. Place the dust bowl back onto

the auto vac until it “clicks” firmly into position.

WARNING: It is very important that the filter is

correctly in position before use.

Cleaning the Dust Bowls and Filters

NOTICE:

Wash the filters regularly. The cleaner the filter is, the better the product will

perform.

• Remove the dust bowl and filter as described in “Removing Dust Bowl and Filters.”

• The dust bowl and lters can be washed in warm soapy water.

• Allow to dry before placing back into the auto vac.

• Once clean and dry, place filters back into the bowl pressing firmly to ensure a secure

fit. Place the dust bowl back onto the auto vac until it “clicks” firmly into position.

Replacing Filters

The lters should be replaced every 6 to 9 months depending on frequency of use, or

when they are worn or damaged. Replacement lters (Catalog Number: VF110) are

available from your Black & Decker dealer.

Visit www.blackanddecker.com to locate dealers.

• Remove the old filters as described above.

• Fit the new filters as described above.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Black & Decker BDH1220AV Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Électronique des véhicules automobiles Black & Decker BDH1220AV