Black & Decker CDC14GK2-XE Manuel d'instructions télécharger pdf (Page 9)

ENGLISH

(Original instructions)

 Remove any dirt and grass from the spool cover and

housing.

 Take the new spool and push it onto the boss in the

housing. Rotate the spool slightly until it is seated.

 Unclip the end of the cutting line and guide the line into

the eyelet (24). The line should protrude approx. 11 cm

from the spool cover.

 Align the tabs (21) on the spool cover with the cut outs

(25) in the housing.

 Push the cover onto the housing until it snaps securely

into place.

Warning! If the cutting lines protrude beyond the trimming

blade (26), cut them off so that they just reach the blade.

Troubleshooting

If your tool seems not to operate properly, follow the

instructions below. If this does not solve the problem, please

contact your local Black & Decker repair agent.

Warning! Before proceeding, unplug the tool.

Appliance runs slowly

 Check that the spool housing can rotate freely. Carefully

clean it if necessary.

 Check that the cutting line does not protrude more than

11 cm from the spool housing. If it does, cut it off so that it

just reaches the line trimming blade.

Automatic line feed does not work

 Keep the tabs depressed and remove the spool cover

from the housing.

 Pull the cutting line until it protrudes 11 cm from the

install a new spool of cutting line as instructed above.

 Align the tabs on the spool cover with the cut outs in the

housing.

 Push the cover onto the housing until it snaps securely

into place.

 If the cutting line protrudes beyond the trimming blade, cut

it off so that it just reaches the blade.

If the automatic line feed still does not work or the

spool is jammed, try the following suggestions:

 Carefully clean the spool cover and housing.

 Remove the spool and check if the lever can move freely.

 Remove the spool and unwind the cutting line, then wind it

on neatly again as described above. Replace the spool as

instructed.

Maintenance

Your Black & Decker corded/cordless appliance/tool has been

designed to operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation depends

upon proper tool/appliance care and regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on corded/

cordless power tools:

 Switch off and unplug the appliance/tool.

 Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.

 Or run the battery down completely if it is integral and then

switch off.

 Unplug the charger before cleaning it. Your charger does

not require any maintenance apart from regular cleaning.

 Regularly clean the ventilation slots in your tool/appliance

and charger using a soft brush or dry cloth.

 Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

 Regularly clean the cutting line and spool using a soft

brush or dry cloth.

 Regularly use a blunt scraper to remove grass and dirt

from the underneath of the guard.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and

packaging allows materials to be recycled and

used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this service

please return your product to any authorised repair agent who

will collect them on our behalf.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Black & Decker CDC14GK2-XE Manuel d'instructions Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Tondeuses à gazon Black & Decker CDC14GK2-XE