Black & Decker LST1018 Manuel d'instructions télécharger pdf (Page 4)

birth defects or other reproductive harm. Some examples of these

chemicals are:

• compounds in fertilizers

• compounds in insecticides, herbicides and pesticides

• arsenic and chromium from chemically treated lumber

To reduce your exposure to these chemicals, wear approved safety

equipment such as dust masks that are specially designed to filter out

microscopic particles.

SAVE THESE INSTRUCTIONS

WARNING

: Fire hazard. Do not store or carry

battery so that metal objects can contact exposed battery

terminals. For example, do not place battery in aprons, pockets, tool

boxes, product kit boxes, drawers, etc., with loose nails, screws, keys,

etc. Transporting batteries can possibly cause fires if the battery

terminals inadvertently come in contact with conductive

materials such as keys, coins, hand tools and the like. The US

Department of Transportation Hazardous Material Regulations (HMR)

actually prohibit transporting batteries in commerce or on airplanes

(i.e., packed in suitcases and carry-on luggage) UNLESS they are

properly protected from short circuits. So when transporting individual

batteries, make sure that the battery terminals are protected and well

insulated from materials that could contact them and cause a short circuit.

BATTERY CAP INFORMATION

Battery storage and carrying caps are provided for

use whenever the battery is out of the tool or charger.

Remove cap before placing battery in charger or tool.

Extension Cord

Make sure your extension cord is in good condition. When using an

extension cord be sure it is heavy enough to carry the current your

product will draw. An undersized extension cord will cause a drop in

line voltage resulting in loss of power and overheating. The following

table shows the correct size to use depending on cord length and

nameplate ampere rating. If in doubt, use the next heavier gauge.

The smaller the gauge number, the heavier the cord.

Double Insulation

Double insulated tools are constructed throughout with two

separate layers of electrical insulation or one double thickness

of insulation between you and the toolʼs electrical system.

Tools built with this insulation system are not intended to be

grounded. As a result, your tool is equipped with a two prong

plug which permits you to use extension cords without concern

for maintaining a ground connection. NOTE: Double insulation does

not take the place of normal safety precautions when operating this

tool. The insulation system is for added protection against injury

resulting from a possible electrical insulation failure within the tool.

REPLACEMENT PARTS: When servicing all tools, USE IDENTICAL

REPLACEMENT PARTS. Repair or replace damaged cords.

Minimum Gauge for Cord Sets

Volts Total Length of Cord in Feet

120V 0-25 26-50 51-100 101-150

240V 0-50 51-100 101-200 201-300

Ampere Rating

More Not more American Wire Gauge

Than Than

0-6 18 16 16 14

6-10 18 16 14 12

10 - 12 16 16 14 12

12 - 16 14 12 Not Recommended

Battery Cap

1 2 3 4 5 6 7 8 9 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Black & Decker LST1018 Manuel d'instructions Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Black & Decker LST1018