Black & Decker AST2XC Manuel d'utilisateur télécharger pdf (Page 3)

ENGLISH

Intended use

Your Black & Decker hammer drill has been designed

for drilling in wood, metal, plastics, and masonry as well

as for screwdriving purposes. This tool is intended for

consumer use only.

Safety instructions

• Warning! When using mains-powered tools, basic

safety precautions, including the following, should

always be followed to reduce the risk of ﬁre, electric

shock, personal injury and material damage.

• Read all of this manual carefully before operating

the tool.

• Retain this manual for future reference.

• Remove the plug from the socket before carrying

out any adjustment, servicing or maintenance.

Keep work area clean

Cluttered areas and benches can cause accidents.

Consider work area environment

Do not expose the tool to rain. Do not use the tool in damp

or wet conditions. Keep the work area well lit. Do not use

the tool where there is a risk of causing ﬁre or explosion,

e.g. in the presence of ﬂammable liquids and gases.

Keep children away

Do not allow children, visitors or animals to come near the

work area or to touch the tool or mains cable.

Dress properly

Do not wear loose clothing or jewellery, as these can

be caught in moving parts. Preferably wear rubber

gloves and non-slip footwear when working outdoors.

Wear protective hair covering to keep long hair out of

the way.

Personal protection

Always use safety glasses. Use a face or dust mask

whenever the operations may produce dust or ﬂying

particles. Hearing protection should be worn.

Guard against electric shock

Prevent body contact with earthed or grounded surfaces

(e.g. pipes, radiators, cookers and refrigerators). Electric

safety can be further improved by using a high-sensitivity

(30 mA / 30 mS) residual current device (RCD).

Do not overreach

Keep proper footing and balance at all times.

Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

Secure workpiece

Use clamps or a vice to hold the workpiece. It is safer

and it frees both hands to operate the tool.

Connect dust extraction equipment

If devices are provided for the connection of dust

extraction and collection facilities, ensure that these are

connected and properly used.

Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches are

removed from the tool before operating the tool.

Extension cables

Before use, inspect the extension cable and replace

if damaged. When using the tool outdoors, only use

extension cables intended for outdoor use. Up to 30 m

of Black & Decker extension cable can be used without

loss of power.

Use appropriate tool

The intended use is described in this instruction manual.

Do not force small tools or attachments to do the job of a

heavy-duty tool. The tool will do the job better and safer at

the rate for which it was intended. Do not force the tool.

Warning! The use of any accessory or attachment or

performance of any operation with this tool other than

those recommended in this instruction manual may

present a risk of personal injury.

Check for damaged parts

Before use, carefully check the tool and mains cable for

damage. Check for misalignment and seizure of moving

parts, breakage of parts, damage to guards and switches

and any other conditions that may affect its operation.

Ensure that the tool will operate properly and perform

its intended function. Do not use the tool if any part is

damaged or defective. Do not use the tool if the switch

does not turn it on and off. Have any damaged or defective

parts repaired or replaced by an authorised repair agent.

Never attempt any repairs yourself.

Unplug the tool

Unplug the tool when it is not in use, before changing

any parts of the tool, accessories or attachments and

before servicing.

Avoid unintentional starting

Do not carry the tool with a ﬁnger on the on/off switch. Be

sure that the tool is switched off when plugging in.

Do not abuse cord

Never carry the tool by its cord or pull it to disconnect

from the socket. Keep the cord away from heat, oil and

sharp edges.

Store idle tools

When not in use, tools should be stored in a dry, locked

up or high place, out of reach of children.

Maintain tools with care

Keep cutting tools sharp and clean for better and safer

performance. Follow the instructions for maintenance and

changing accessories. Keep handles and switches dry,

clean and free from oil and grease.

Repairs

This tool complies with relevant safety requirements.

Repairs should only be carried out by qualiﬁed persons

using original spare parts; otherwise this may result in

considerable danger to the user.

Electrical safety

This tool is double insulated; therefore no

earth wire is required. Always check that the

power supply corresponds to the voltage on

the rating plate.

Additional safety instructions for Australia and New

Zealand

• This appliance is not intended for use by young or

inﬁrm persons without supervision. Children must

be supervised to ensure they do not play with the

appliance.

• If the supply cord is damaged, it must be replaced by

the manufacturer or an authorised Black & Decker

Service Centre in order to avoid a hazard.

1 2 3 4 5 6 7 8 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Black & Decker AST2XC Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Perceuses électriques Black & Decker AST2XC