Black & Decker 62784 Manuel d'utilisation et d'entretien télécharger pdf (Page 5)

IMPORTANT: Follow this procedure to clean the iron

before first use and to become familiar with its

features.

1. Remove any labels, stickers, or tags which may be

attached to the body or soleplate of the iron.

2. Fill the Water Tank about 1/3 full with water (approx-

imately 2 oz.). (See “Filling With Water,” page 6)

3. Plug the iron into a standard 120V (polarized) electri-

cal outlet.

4. Set the TEMPERATURE SELECTOR DIAL to the

Cotton or Linen settings (6 or 7). Press the PUSH ON

Button and the light will come on. Preheat for about 2

minutes. (See “Starting The Iron,” page 6)

5. While ironing on an old cotton terry cloth towel for

about two minutes, try using each of the iron’s fea-

tures being careful to avoid placing hands or face near

the steam vents:

SPRAY: Turn the SPRAY/SURGE Button so that the

Spray faces the INDICATOR MARK. Pump the SPRAY

Button a few times to see the amount of water that is

released.

SURGE OF STEAM: Turn the SPRAY/SURGE Button so

that the Surge faces the INDICATOR MARK. Pump the

SURGE Button a few times to see the blast of steam

that comes out. This will also activate the

SurgeClean™ feature that will help clean the steam

vents.

STEAM SETTINGS: Turn the ADJUSTABLE STEAM/DRY

DIAL to the INDICATOR MARK for (light), (medi-

um), and (heavy) settings to become familiar

with the different amounts of steam at each setting.

How To Use

PREPARING

THE IRON

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Black & Decker 62784 Manuel d'utilisation et d'entretien Page 5