Black & Decker 62784 Manuel d'utilisation et d'entretien télécharger pdf (Page 10)

1. Is the iron plugged in and the green Power Light on?

Press the PUSH ON Button.

2. If the Light is not on, will a lamp plugged into the out-

let turn on?

3. Is the TEMPERATURE SELECTOR DIAL turned to a

fabric setting?

1. Check to see if there is enough water in the Water

Tank.

2. Is the ADJUSTABLE STEAM/DRY DIAL set at , ,

or ? Adjust the Dial to Dry and back to the

desired steam level several times.

1. Turn the TEMPERATURE SELECTOR

DIAL to Off.

2. Set the ADJUSTABLE STEAM/DRY

DIAL to the INDICATOR MARK for Dry.

3. Unplug the iron and allow it to cool.

4. Empty the water by holding the iron

over a sink with the tip pointing down-

ward (Figure G). Take care to avoid

any hot water splatter. Water will

empty out the WATER FILL HOLE.

5. If all the water hasn’t drained,

repeat the emptying process.

1. Allow the iron to cool completely.

2. Wipe the outer shell and

SilverStone

non-stick soleplate with

a cloth dampened in water and a mild

household detergent. Never use abra-

sives, heavy-duty cleansers, or scour-

ing pads.

EMPTYING THE IRON

Figure G

CLEANING

THE OUTSIDE

SURFACES

Need Help?

IRON

WON’T HEAT?

IRON WON’T

START

STEAMING

1 2 ... 5 6 7 8 9 10 11 12

Pas de commentaire

Black & Decker 62784 Manuel d'utilisation et d'entretien Page 10