Black & Decker DCM200C Guide d'installation télécharger pdf (Page 7)

DCM 200 Installation

Page 7

ELECTRICAL SURGES CAN DAMAGE YOUR

CONTROLLER

Uncontrolled feeding of chemicals can result in injury or death.

A damaged controller could feed chemicals in an uncontrolled

manner.

If you suspect your ProMinent controller is not operating properly,

disconnect it from the chemical feeders until the problem has been

corrected.

Electrical Surges

ProMinent controllers, like all modern electronic devices can be damaged by severe electrical spikes and

surges, like lightning. Every effort has been made to harden your controller against such surges, but no

precautions are 100% effective. Additional surge protection can be installed at time of installation, but

even that is not a guarantee that surge damage will not occur. If surge damage occurs, chemicals could

be fed to your pool or spa, continuously with no safety controls. If you inspect your ProMinent controller

after a possibly damaging power surge (thunderstorm or power outage) and suspect the controller is not

operating properly, disconnect the chemical feeders at once, and contact your ProMinent dealer for

service.

ALWAYS USE ANTI

SYPHON DEVICES

Uncontrolled feeding of chemicals can result in injury or death.

Anti-Syphon devices must be installed on chemical feeders to prevent

uncontrolled feed of concentrated chemicals.

If a vacuum is created in the water circulation line and no anti-siphon

device is installed on the chemical feeders, potentially hazardous

concentrations of chemicals can be drawn into pool or spa. Always use

injection check valves and anti-siphon valves in the chemical feed lines to

prevent this situation from occurring.

Water disinfection

control involves

irritating, corrosive,

caustic, and potentially

toxic chemicals. Use

extreme caution and

comply with all national,

state and local

regulations and

recommendations for the

handling and storage of

these chemicals.

1 2 3 4 5 6 7 8 9 10 11 12 ... 33 34

Pas de commentaire

Black & Decker DCM200C Guide d'installation Page 7