Black & Decker TO1635BC Manuel d'utilisation et d'entretien Page 4

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 13
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 3
7
6
ENGLISH
HELPFUL INFORMATION ABOUT YOUR OVEN
You can change the temperature from ˚F to ˚C by pressing the and ▼buttons
simultaneously.
For your convenience, the unit always remembers the last selected setting unless unplugged.
You can change this setting before the oven begins preheating or once it has reached the
preset temperature and time.
You cannot change the temperature or time during the preheat cycle. Once the set
temperature is reached, you can then change the time at any time.
If using convection bake, remember to lower the suggested temperature of a recipe or
package by 25˚F.
Caution: Unit gets hot. NEVER touch outer surfaces, including the glass door. Always use oven
mitt or pot holder.
SLIDE RACK POSITIONS
There are 4 possible positions for the slide racks. There is an upper and a lower slot; the rack
can also be inverted for 2 additional positions.
Position 1: Use lower slots along oven walls. Insert rack using a rack-down position.
Position 2 : Use lower slots along oven walls. Insert rack using a rack-up position.
Position 3: Use upper slots along oven walls. Insert rack using a rack-down position.
Position 4 : Use upper slots along oven walls. Insert rack using a rack-up position.
Caution: Unit gets hot. NEVER touch outer surfaces, including the glass door. Always
use oven mitt or pot holder.
Note: You have 10 seconds for selecting the temperature and time. If you exceed this
time, the display will change back to the default (0 00) temperature and time; simply
repeat steps 1 - 5 below to begin again.
Note: You can stop the cooking at any time by pressing the I/O button.
BAKE FUNCTION
Selecting Cooking Temperature and Time
1. Press BAKE
button. The unit beeps, On indicator light blinks and 350°F
(180 °C) default temperature flashes on the digital display.
2. To change the temperature, immediately press or button until you reach desired
temperature.
Note: Cooking temperature can be adjusted from 200˚F to 450˚F (93˚C - 232˚C).
Tap button and release to change in increments of 5 degrees.
Press and hold button to change rapidly in increments of 25 degrees.
3. To set the cooking time, press the TIME
button. If you just plugged in the unit,
the default cooking time of 0:30 (30 minutes) flashes on the display; otherwise it will
display the last selected time.
4. Immediately press or button to select desired time up to a maximum
of 2 hours.
Tap button and release to change in one-minute increments.
Press and hold button to change rapidly in 10-minute increments.
5. Once you have set desired temperature and time, press I/O button.
Digital display flashes LO and PREHEAT until the unit reaches 150˚F (65˚C), then
it flashes temperature until the set temperature is reached.
6. Open oven door. Insert food to be cooked or heated on bake pan or pizza pan into the
oven. See COOKING CHART on page 9 for recommended temperatures and times.
7. Close oven door.
Important: You cannot change the temperature or time during the preheat cycle.
Once unit reaches selected temperature, then you can change them at any time.
For your convenience, the unit always remembers the last selected setting, unless
unplugged.
When unit reaches set temperature, it beeps and the display alternates between
temperature and time during the entire cooking cycle.
The time will count down in one-minute increments until it reaches 59 seconds,
then it counts down in one-second increments.
At the end of the cooking cycle, the unit beeps 3 times and cooking stops.
8. To open the oven door, use an oven mitt to grip handle and gently pull forward to
bring door down until it rests on the counter.
CONVECTION COOKING FUNCTION
The CONVECTION function uses an internal fan to distribute heat evenly. You can only
use this feature with the BAKE function.
1. To turn on the fan
for convection cooking:
After you have selected the desired temperature and time, press I/O button
then press the CONV
button. You will hear the fan running and the digital
display shows the fan symbol throughout the cooking cycle.
When baking using convection, the temperature selected should be 25˚F
(10 ˚C) lower than recommended temperature for conventional cooking.
Watch cooking time as some foods will bake faster.
QUICK BAKE FUNCTIONS
These functions allow you to cook certain foods at preset cooking temperatures and
times, or can be adjusted as desired.
COOKIES FUNCTION
Preset Temperature: 350˚F (180˚C).
Preset Time: 12 minutes
Rack Position: 2 or 3. Place in the center of the oven.
PIZZA FUNCTION
Preset Temperature: 400˚F (204˚C)
Preset Time: 20 minutes
Rack Position: 2 or 3
FROZEN SNACKS FUNCTION
Preset Temperature: 400˚F (204˚C)
Preset Time: 6 minutes
Rack Position: 2 or 3
POTATO FUNCTION
Preset Temperature: 400˚F (204˚C)
Preset Time: 45 minutes
Rack Position: 2 or 3
1. Press the desired Quick Bake Function button.
2. To change the temperature, immediately press or buttons. Tap button and
release to change in increments of 5 degrees. Press and hold button to change in
increments of 25 degrees.
3. To change the time, press the TIME
button. Tap button and release to change
in one-minute increments. Press and hold button to change in 10-minute
increments.
Vue de la page 3
1 2 3 4 5 6 7 8 9 ... 12 13

Commentaires sur ces manuels

Pas de commentaire