English
-6-
Filling the water tank
In order to be able to use the steam function or the spray feature; you will first need to fill
the water tank (9) with water.
• Make sure that the appliance is unplugged. Move the slider (5) lock to the left position so
the cord (3) is not attached to the Iron.
• Open the water tank cover (14).
• Fill the appliance with water using the Jug (7) provided.
• Close the water tank cover & return the Iron to the stand (6).
Warning! Never fill above the maximum filling level (11)- Normal tap water can be used,
but if you live in a hard water area the use of distilled water is recommended- Do not use
chemically descaled water.
Use
Warning! Do not leave the appliance unattended while it is connected to the power supply
and during the cool down period.
Temperature setting
The required temperature setting depends on the garment fabric.
Adjust the temperature control dial (10) to the required setting:
• Silk • Acrylic • Polyester • Wool • Cotton • Linen
If you are unsure of the fibre content of a garment, start with a low
temperature setting and test on a small area (seam or inside hem).
If wrinkles remain, gradually increase the heat setting until you find the optimum setting.
Using as a dry iron
• Fit the Iron to the stand (6), so the cord adaptor (4) & power cord (3) are connected to the
Iron.
• Plug the appliance in and switch on.
• Set the Variable Steam / Self Clean Control (15) to the "0" position (Fig 1).
• Adjust the temperature control dial (10) to the required setting.
The Heating Lamp (1) will switch off when the appliance has reached the required
temperature.
Using as a steam iron
• Fill the water tank as described above.
• Fit the Iron to the stand, so the cord adaptor & power cord are connected to the Iron.
• Rotate the variable steam / self clean control to the steam position (Fig 2).
• Plug the appliance in and switch on.
• Adjust the temperature control dial (10) to the required setting.
The Heating Lamp (1) will switch on. When the heating light switches off the iron will be ready
for use as a steam iron. The heating light will regularly switch on and off whilst ironing. The
power lamp (2) will stay on for as long as the iron is connected to the electrical supply.
• To create steam, set the Variable Steam / Self Clean Control (15) to the required steam
position (Fig 2).
(16 pages)
(2 pages)
(32 pages)
(44 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels