Black & Decker PHV1410 Manuel d'instructions télécharger pdf (Page 7)

Troubleshooting

Problem Possible Cause Possible Solution

• Unit will not start. • Battery not charged. • Check battery charging

requirements.

• Battery will not charge. • Charger not plugged in. • Plug charger into a working

outlet. Refer to “Important

Charging Notes” for more details.

• Check current at receptacle by

plugging in a lamp or other appliance.

• Check to see if receptacle is

connected to a light switch which

turns power off when you turn out

the lights.

• Surrounding air • Move charger and tool to a

temperature too hot or surrounding air temperature

too cold. of above 40 degrees F(4.5°C) or

below 105 degrees F (+40.5°C).

For assistance with your product, visit our website www.blackanddecker.com for the

location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

Accessories

Recommended accessories for use with your tool are available from your local dealer or

authorized service center. If you need assistance regarding accessories, please call:

1-800-544-6986.

WARNING: The use of any accessory not recommended for use with

this tool could be hazardous.

BATTERY REMOVAL AND DISPOSAL

This product uses nickel-cadmium (Ni-Cd) rechargeable and recyclable batteries.

When the batteries no longer hold a charge, they should be removed from the Vac and

recycled. They must not be incinerated or composted.

The batteries can be taken for disposal to a Black & Decker, Company-Owned or

Authorized Service Center. Some local retailers are also participating in a national

recycling program (see “RBRC

Seal”). Call your local retailer for details. If you bring

the batteries to a Black & Decker Company-Owned or Authorized Service Center, the

Center will arrange to recycle old batteries. Or, contact your local municipality for proper

disposal instructions in your city/town.

To remove the battery pack for disposal:

1.) First, before attempting to disassemble the product, turn it on and leave it on until

the motor completely stops insuring a complete discharge of the batteries.

2.) Ensure nozzle is rotated out of storage position.

3.) Using a phillips screwdriver, remove the seven screws securing the two housing

halves.

4.) Lift the housing cover away from the assembly.

5.) Remove the single screw which secures the motor assembly. (located at bottom of

unit, adjacent to the bowl.

6.) Lift out the motor assembly.

7.) Remove the three screws in the cover and lift the cover off of the assembly

exposing the batteries.

8.) Detach motor connections and lift motor away from assembly.

9.) Detach all lead connections and remove batteries from battery casing.

10.) Dispose of batteries as per recommended guidelines.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Black & Decker PHV1410 Manuel d'instructions Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Chargeurs de batterie Black & Decker PHV1410