Page 6
©
2012 Sargent and Greenleaf
SARGENT AND GREENLEAF
®
A Subsidiary of Stanley Security Solutions, Inc.
Revision date: 9/19/2012
6124 and 6125 Series Motorized Electronic Safe Locks
• Underwriters Laboratories Listed Type 1, CEN B, VdS Class 2, A2P B/E, DNV 3492, and RoHS compliant.
• Both locks feature a motor-driven lock bolt which offers a high level of security by eliminating the threat of vibration and bouncing attacks.
• The multiple user mode provides for a management reset code. The dual user mode does not provide for a management reset code.
• Both models offer one master code, one supervisor code, seven user codes, and one time delay override code.*
• Multiple user mode—Any of the lock’s codes can be used to open. Multiple user can also be switched to Manager/Employee mode, in which the
master and supervisor codes toggle the lock on and off for operation by the holders of user codes.
• Dual user mode—The standard multiple user lock can be permanently switched to dual user mode at setup, before the master code is changed
for the first time. Then the lock can only be opened if two separate codes are entered within one minute of each other. This provides a higher
level of access control.
• A penalty time feature to is provided to prevent opening by entering sequential or random codes until a valid code is found.
• A delay up to 99 minutes can be easily set, and provides for one time delay override code for cash carrier applications.
• The lock offers a duress capability, allowing a distress signal to be sent through the customer’s central alarm system in the event of an emer-
gency. An optional duress module (part #6102-090) is required to use this function.
• The 6124 Series is designed for boltwork blocking applications that do not require direct attachment of the lock bolt to the safe’s boltwork.
• The 6125 Series is made for direct boltwork attachment and will push and pull 2.24 lbs. (10 newtons)—maximum load 5.6 lbs. (25 newtons).
• Some models are equipped with a bolt position indicator that closes a circuit when the lock bolt is in either the locked or unlocked position (see
part number table below).
Lock Bodies (only)
Two-Battery
Keypads
Bezel Finish Tamper Indicating Notes
61KP-105 satin chrome no maintains U.L. Listing
61KP-202 satin chrome yes maintains all ratings
Keypads (only)
These locks come with both M6 and ¼-20 mounting screws.
1
Duress requires an optional duress module (part #6102-090).
2
If the lock is switched to dual user mode, the Management Reset Code is not available.
* If a multiple user lock has the duress feature enabled, User PINs 4 through 8 are automatically disabled and are not available. A dual user lock always has all codes available for
use. In both models, the time delay override code uses PIN 9. If time delay override is disabled, PIN 9 functions like a standard user code.
6124
Order
Number
6125
Order
Number
Configuration
Management
Reset Code
Time
Delay
Time
Delay
Override
Bolt
Position
Indicator
Duress
6124-143 6125-138 multiple user yes
2
1-99 min yes no yes
1
6124-238 6125-237 multiple user yes
2
1-99 min yes yes yes
1
CLASS 2
B
A/B
TYPE 1
(8 pages)
(14 pages)
(12 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels