Black & Decker VC2600 Manuel d'utilisation et d'entretien télécharger pdf (Page 11)

Reinstalling Permanent Dust Bag

1. Slide clip onto the dust bag (U).

2. Insert the bag collar with arrow in the down position.

Place collar all the way down into the track guides (V).

3. Secure dust bag in place.

4. Close the canister lid.

Cleaning or Replacing Dust Filter

The dust filter is located in the back of the dust bag compartment.

1. Open the canister lid.

2. Grasp dust filter and pull up and out (W).

3. Shake over a trash can.

4. If needed, wash the filter in soap and water.

5. Allow to dry completely before replacing in the vacuum.

6. Insert cleaned dust filter or replace with a new one.

7. Close the canister lid.

Exhaust Filter

The exhaust filter is located in the back of the canister. Replace it at least every

6 months to ensure proper operation. It is not washable.

1. Turn the filter cover clockwise and pull out.

2. Grasp the filter and pull out (X).

3. Insert a new filter.

4. To replace filter cover, align the inserts on the filter cover

with the openings on the back of the vacuum canister.

Turn counterclockwise until it is secure in place.

STORAGE

Unit stores vertically for compact storage (Y).

TROUBLESHOOTING

Problem Solution

Vacuum will not start. Plug in firmly; press the On/Off

step-on push button.

Low suction or poor pickup. Replace exhaust filter.

Empty dust bag.

Check for a clog in the flexible

hose or the expandable

telescopic chrome wand.

Clean or replace dust filter.

Cord will not rewind. Clean the power cord.

It might be dirty or twisted. Pull out cord, straighten and

press retractable cord step-on

push button.

VC2600Pub1000003275 12/1/06 1:50 PM Page 20

1 2 ... 6 7 8 9 10 11 12 13

Pas de commentaire

Black & Decker VC2600 Manuel d'utilisation et d'entretien Page 11