-11-
Emptying the container (fig.L&M)
The container (8) must be emptied when the
maximum mark is reached.
• Remove the hose.
• Press the release button (30).
• Lift the lid (31) until it locks into position (fig. L).
• Hold the container at the handle (29). Take the
container (8) off the appliance.
• Hold the container over a waste bin.
• Press the release button (32) to open the
container (fig. M). Empty the container as
necessary.
• Close the base (33) by moving it upward until
the lock locates in the latch.
• Re-insert the container into the appliance.
• Close the lid until it locks into place.
Cleaning
Warning! Before cleaning and maintenance,
switch the appliance off and unplug it.
• From time to time wipe the appliance with a
damp cloth. Do not use any abrasive or solvent-
based cleaner. Do not immerse the appliance in
water.
Cleaning the container filter (fig.L-P)
The container filter prevents dust and dirt from
entering the motor housing. The filter is re-usable.
To maintain efficient suction performance, the filter
should be cleaned every week, or whenever
suction performance is noticeably reduced.
• Remove the container (8) from the appliance (fig. L).
• Empty the container (fig. M).
• Depending on the model, proceed as describe
below to clean the filter.
• After replacing the filter, close the container.
• Re-insert the container into the appliance.
VO1700 (fig.N&P)
• Remove the cartridge (34) by turning
counterclockwise.
• Pull the filter (35) out of the container.
• Shake off excess dust by tapping the filter into a
dustbin.
• Depending on its condition, rinse the outside of
the filter with water. Allow the filter to dry for 24
hours before reinserting it.
• Take out the filter (36) located right below the
grid and brush off any loose dust before re-
inserting it.
• Replace the container filter.
• Re-fit the cartridge.
Warning! Do not brush or use compressed air to
clean the filter.
• Depending on its condition, rinse the outside of
the filter with water. Allow the filter to dry for 24
hours before reinserting it.
Warning! Do not wash the inside of the filter.
• Take out the filter set (38) located right below the
grid and brush off any loose dust before re-
inserting it.
• Replace the container filter and tighten it.
• Re-fit the cartridge.
Cleaning the motor filter (fig. L & Q)
The motor filter prevents particles and larger
objects from entering the motor housing when the
container is removed. The filter is re-usable and
should be cleaned regularly.
• Open the lid (31) (fig. L).
• Take the filter (39) out (fig. Q).
• Brush any loose dust off the filter.
• Replace the filter.
• Close the lid.
Replacing the filters (fig. L - R)
The container filter should be replaced every 6 to
9 months and whenever worn or damaged. When
replacing the container filter, the motor filter and
the outlet filters have to be replaced as well.
Replacement filter sets are available from your
Black & Decker dealer.
Replacing the container filter (fig. L - P)
• Proceed as described above to replace the
filters.
Replacing the motor filter (fig. L & Q)
• Proceed as described above to replace the filter.
VO1700 - Replacing the HEPA filter (fig. R)
The HEPA filter reduces the amount of dust exiting
the motor housing to a minimum.
• Proceed as described above to replace the filter.
(8 pages)
(36 pages)
(14 pages)
(8 pages)
(68 pages)
(12 pages)
(16 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels