WARNING: Inspect the seal on the steam
nozzle and hose before each use (Figure J). If the
seal is missing or damaged contact your nearest
authorized repair agent. Do not use the appliance.
CAUTION: Ensure that the hose is securely
fastenedbefore using the hand held steam cleaner.
ATTACHING AN ACCESSORY - Fig. K
Align the lugs (19) on the hose with the recesses on
the accessory.
Press the accessory onto the hose and twist
counterclockwise until the accessory clicks into place.
REMOVING AN ACCESSORY
Twist the accessory clockwise then pull away from
the hose.
REMOVING THE HOSE
away from the steam nozzle.
FILLING THE WATER TANK - Fig. L
help prolong the life of the system.
WARNING:
Your water tank has a 10.1oz
capacity. Do not over fill the tank.
NOTICE:
Fill the water tank with regular tap water.
NOTICE:
In areas of very hard water, the use of
de-ionized water is recommended.
Ensure that the appliance is switched off and the
power cord is disconnected from the power supply.
handle tube (4) in the upright position.
Using the supplied jug (22), fill the water tank (3) with water.
NOTICE: Always empty the steam mop after use.
OPERATION
SWITCHING ON AND OFF - Fig. M
CAUTION: FOR FLOOR USE ONLY; DO
NOT USE THE UNIT UPSIDE DOWN.
NOTICE:
When the steam mop is first turned on the
ready to use the water reservoir will glow blue. It takes
approximately 15 seconds for the steam mop to heat up.
button (1).
button.
NOTICE:
Never leave the steam mop in one spot on any surface for any period of time.
Always place the steam mop on the resting mat (7) with the handle tube (4) in the upright
position when stationary and make sure the steam mop is turned off when not in use.
NOTICE: Always empty the steam mop after use.
7
19
K
3
21
22
L
M
J
Commentaires sur ces manuels